 |
|
Advantest U4941N Portable Spectrum Analyzer, 9 kHz - 2.2 GHz
The Advantest U4941N introduces portability and convenience to RF measurements. The 5.8 x 11.5 x 13 inch, 14.3 pound package is easily carried to hard-to-reach places. And if your measurement site lacks AC mains, the U4941N is ready to run directly from an external 12 VDC supply or from its own optional attach-on battery.
This analyzer features a mechanical package that is designed to MIL-T-28800D environmental standards for shock, vibration, and drop - adding to your confidence to carry the U4941N into the field.
Features
- Operate from Attach-on Optional Battery, Standard AC Adapter, or Direct 12-V DC
- 6-inch Color TFT LCD display
- Built-in Counter
- 90 dB display dynamic range
- EMI Measurement with built-in Quasi-peak detector and EMC filters
- 5.8 x 11.5 x 13 inch; 14.3 lbs
Additional Capabilities:
- AM/FM detector and built-in speaker/headphone jack for signal demodulation
- Faster measurements using built-in routines for: Occupied bandwidth; Adjacent channel leakage; Noise power; 2nd and 3rd order distortion; Percent AM
- 10 MHz external reference input for additional frequency accuracy
- RF Input: Connector type: N type. Impedance: 75 ohms nominal
- 10 MHz Reference Input: BNC female
- Video Output: BNC female
- External Trigger Input: BNC female
- Gate Input: BNC female
- Phone Output: Subminiature monophonic jack
- GPIB Interface: IEEE-488 bus connector
- Plotter: R9833, HP7470A, HP 7475A, HP7440A, HP7550A, HP2225A
- RS-232C: D-SUB 9-pin
- External Memory Card: slots: 2. Connector: JEIDA-Ver. 4.1/PCMCIA Rel. 2.0
- Power Requirements:
AC input (use AC/DC adaptor A08180): 90 to 120 V; 220 to 240V
External DC input:
Voltage range: +10 to +15 V, Power
Consumption: 50 W maximum
|
