Features

• Major transmitter functions evaluated by a single system
• Compatible with NADC, PDC, PHS, Digital MCA, GSM, DCS1800 (PCN), CT2, DECT, WCPE, PACS, RCR STD-39 TETRA systems, and GMSK and pi/4 DQPSK universal measurement (measurement software can be installed as an option)
• High-speed measurement (under 1 second for modulation-accuracy measurements)
• Input up to 10 W (internal 20 dB attenuator and power meter for high power levels)

Measurement Example

• Quick configuration for different communication systems
• One-touch selection of measurement items
• Direct measurement with broadband power sensor
• Internal calibration signal
• High-power measurements
• Measurement of antenna power and leakage power during carrier-off

Specifications

• Frequency Range: 100Hz to 8.5GHz
• Max. input level: +40 dBm (10 W)

Spectrum Analyzer:

• Frequency:
  * Setting Range: 100Hz to 8.5GHz (resolution: 1Hz), 0 to 2 GHz (freq. band: 0), 1.7 to 7.5GHz (freq. band: 1-), 6.5 to 8.5 GHz (freq. band: 1+)
  * Preselector range: 1.7 to 8.5 GHz (bands: 1-/1+)
  * Span: Setting range: 0 Hz, 100 Hz to 8.5 GHz
  * RBW: Setting range: 10 Hz to 3 MHz (3 dB), 1-3 sequence
• Amplitude:
  * Level measuring range: Average noise level to +40 dBm.  Average noise level: ≤ -112 dBm
  * Reference Level: Setting range: -80 to +40 dBm; Input attenuator: Setting range: 20 to 75 dB in 5 dB steps
  * Detection mode: POS PEAK, SAMPLE, NEG PEAK
  * AM/FM demodulation: Demodulated waveform display and monitoring demodulated audio signal with internal speaker

Power Meter:

• Frequency Range: 100 kHz to 5.5 GHz
• Level Range: -20 to +20 dBm
• Applicable power sensor: MA4601A

Other features:

• External Memory: one slot
• Direct plotting: can hard-copy screen via GPIB 2
• External Control:
  GPIB 1 - As device controlled by host
  GPIB 2 - Controls other instruments as controller

Please contact us for more information on the Anritsu MS8604A

Haefely ECOMPACT4

CA Instruments 5001ix

Voltech PM6000

IFI T4026-40

Teseq NSG437

Solar 2654-1