Anritsu MT8212B Cell Master™ - Cable, Antenna and Base Station Analyzer

The Anritsu Cell Master MT8212B is a hand held cable and antenna analyzer power meter and spectrum analyzer that includes a keypad to enter data and a color lcd to provide graphic information of various measurements.

The Cell Master is capable of up to 1.5 hours of continuous operation from a fully charged field-replaceable battery and can be operated from a 12V dc source. Built-in energy conservation features can be used to extend battery life.

The Anritsu MT8212B is designed for measuring SWR, return loss, cable insertion loss and locating faulty RF components in antenna systems, and includes spectrum analysis capabilities with carrier-to-interference analysis.

The displayed trace can be scaled or enhanced with frequency markers or limit lines. A menu option provides for an audible "beep" when the limit value is exceeeded. The LCD brightness can be adjusted for optimum visibility in varying environments.

Anritsu MT8212B Cable and Antenna Analyzer

Frequency Range	25MHz to 4GHz
Frequency Accuracy	± 75ppm @ + 25 °C
Frequency Resolution	100kHz
Output Power	< 0 dBm (-10 dBm nominal)
Immunity to Interfering Signals	on channel +17 dBm; on frequency -5dBm
Measurement Speed	≤ 3.5msec / data point (CW ON)
Number of data points	130, 259, 517
Return Loss	Range:	0.00 to 60.00 dB
	Resolution:	0.01 dB
VSWR	Range:	1.00 to 65.00
	Resolution:	0.01
Cable Loss	Range:	0.00 to 30.00 dB
	Resolution:	0.01 dB
Measurement Accuracy	>42dB corrected directivity after calibration
DISTANCE-TO-FAULT
Vertical Range	Return Loss:	0.00 to 60.00 dB
	VSWR:	1.00 to 65.00
Horizontal Range	0 to (# of data pts –1) x Resolution to a maximum of 1197 m (3929 ft), # of data pts = 130, 259 or 517

Anritsu MT8212B Spectrum Analyzer

Frequency Range	100 kHz to 3.0 GHz (tuneable to 9 kHz)
Frequency Reference (Internal Timebase)	Aging:	±1 ppm/yr
	Accuracy:	±2 ppm
Frequency Span	10 Hz to 2.99 GHz in 1, 2, 5 step selections in auto mode, plus zero span
Sweep Time	≤1.3 sec full span; ≤50 µsec to 20 sec zero span
Resolution Bandwidth (–3 dB)	100 Hz to 1 MHz in 1-3 sequence ±5% Accuracy
Video Bandwidth (–3 dB)	3 Hz to 1 MHz in 1-3 sequence
SSB Phase Noise (1 GHz) @ 30 kHz Offset	≤–75 dBc/Hz
Spurious Responses Input Related	≤–75 dBc/Hz
Spurious Residual Responses	≤–90 dBm, ≥10 MHz
	≤–80 dBm, <10 MHz
	(10 kHz RBW, pre-amp on)
AMPLITUDE
Total Level Accuracy	±1 dB typical (±1.5 dB max), ≥10 MHz to 3 GHz
	±2 dB typical <10 MHz for input signal levels –60 dBm, excluding input VSWR mismatch
Dynamic Range	>65 dB, typical
Display Range	1 to 15 dB/division, in 1 dB steps, 10 divisions displayed
Scale Units	dBm, dBV, dBmV, dBµV, V, W
RF Input VSWR	(with ≥20 dB atten.) 1.5:1 typical, (10 MHz to 2.4 GHz)

Anritsu MT8212B Power Meter:

Frequency Range	4.5 MHz to 3.0 GH
Display Range	–80 dBm to +80 dBm
Measurement Range	–80 dBm to +20 dBm (+80 dBm with external attenuator)
Offset Range	0 to +60 dB
Accuracy	±1 dB typical (±1.5 dB max), ≥10 MHz to 3 GHz
Accuracy	±2 dB typical <10 MHz
VSWR	1.5:1 typical (P_in > –30 dBm, >10 MHz to 2.4 GHz)
Maximum Power	+20 dBm (0.1W) without external attenuator

Anritsu MT8212B Options:

Option 21: Transmission Measurement
Option 25: Interference Analyzer (requires directional antenna)
Option 27: Channel Scanner
Option 28: CW Signal Generator
Option 31: GPS (requires GPS antenna)
Option 33: cdmaOne and cdma2000 1xRTT(OTA)(requires options 31 & 43)
Option 40: RF Measurements - GSM
Option 42: RF Measurements - CDMA
Option 43: cdmaOne and cdma2000 Demodulator
Option 50: T1/E1 Analyzer

**Contact your sales representative for the availability of options**

Please contact us for more information on the Anritsu MT8212B Cell Master - Cable, Antenna and Base Station Analyzer

Similar Test Equipment
Fluke DSP4300 Digital Cable Analyzer	Anritsu S331D Site Master Cable & Antenna Analyzer	Acterna / JDSU SDA-5000 Cable Analyzer	Fluke DTX-1800 Cable Analyzer	Anritsu MT8212A Cable Analyzer