| AC Hypot® and Ground Continuity Test Set
Primary
Application:
Manufacturing and production line testing of commercial and consumer products to
meet UL, CSA, VDE, BSI and IEC requirements where dielectric withstand and ground
continuity tests are specified.
Hypot Output: 0 - 3 kV AC continuously adjustable, current 15
mA.
Failure Detector:
Audile and visual means of indicating an unacceptable performance in addition to
auxiliary relay contacts ( SPDT ) transferred when failure is detected. Adjustable
current sensitivity from .5 to 15 mA.
Metering: Kilovoltmeter analog 0 - 3 kV with 50 volt reading
resolution.
High Voltage & Return / Continuity:
High voltage three prong isolated grounding type receptacle allows equipment to be
tested to be plugged directly into the dielectric withstand tester. Also equipped
with removable five foot high voltage and return / continuity leads.
Remote Control:
Terminals are provided for connections of remote start and reset switches.
Auxiliary relay contacts ( SPDT ) rated for 240 volts at 5 amps transferred when
failure is detected.
Line Safety Monitor:
A safe power-on indicator monitors input power and warns against malfunctions in
the grounded 3-wire 120 volt AC receptacle to which the equipment is connected.
Built-In One Second Test: Available through rear mounted
switch. |
