• Splice Loss: average splice loss of 0.02 dB or less when splicing identical single mode fibers, 10 micron core size and 125 micron cladding diameter
• Fiber Types: single and multimode fibers
  Pre-set profiles for six fiber types:
  1.  Corning matched clad single mode
  2.  Corning 50 micron core multimode
  3.  AT&T 62.5 micron core multimode
  4.  AT&T depressed clad single mode
  5.  Multimode pigtails 62.5/125
  6.  Single-mode pigtails
  *  14 additional profiles can be added by the user for other fibers
• Fiber Sizes: 70-200 micron glass cladding outside diameter.   The enhanced local injection and detection system accepts 250, 500, and 900 micron buffered fibers
• Viewing Optics: rear projection screen, 45X 1.5" by 2.5" viewing screen with 25 micron markers and fiber alignment pointers
• Fiber Alignment: piezoelectric position stages with 0.05 micron resolution.
  * screen vertical: 125 micron travel
  * focus: 125 micron travel
  * feed: 75 micron travel
• V-Groove Clamping: each fiber is passively located with a precision v-groove and magnetic clamp fixture within 10 microns
• Power Sources: line 105-130 V or 220-240 VAC, 60 VA, 50 or 60 Hz.
  * Internal 5.7 amp-hour NiCad battery
  * External 10 to 15 VDC, 30 watt source
• Size: closed case is 13.75" x 12" x 9.75"
• Weight: 28 lbs

Available Accessories Include:

• Precision Fiber Cleaver
• Splice Tray Holder
• Heater for Shrink Splice Protection
• FC Pigtail Adapter
• SC Pigtail Adapter
• ST Pigtail Adapter
• Car Lighter Adapter
• Transit Case