 |
|
Biddle AccuTrace (Cat. # 656621) Cable Route Tracer
The Biddle AccuTrace Cable Route Tracer consists of a
line-energizing transmitter, a portable gun-type receiver, and other
accessories. It is used to locate, trace, and measure the depth of any
conductive line, such as pipe, cable, or conduit. The receiver has a
telescoping detection rod making it convenient to use and to store. The
transmitter and receiver are tuned as a pair, for most efficient
operation.
When the transmitter is combined with the carrying case,
the entire case generates an inductive field and provides increased
tracing distance over other inductive transmitters. The superinductive
transmitter can effectively energize deeper lines by producing a strong
energizing signal for a given battery drain. Used without the carrying
case, the transmitter is ideal for tight signal coupling in small tracing
areas.
Specifications:
| Electrical |
| Power
Supply |
the
receiver and the transmitter are both powered by eight
"AA" size alkaline batteries |
| Battery
life |
approximately
30 hrs. of service before requiring replacement; using the PULSE
mode of operation typically reduces battery drain 30 - 40 %
compared to transmitting continuously |
| Frequency |
116
kHz |
| Pulse
rate |
5
- 10 Hz |
Output
voltage,
conductive mode,
no load |
48
V p-p on HI, 27 V p-p on LO |
Output
current,
conductive mode |
load
dependent
i(R) ≈ 240/(R/200+1) mA p-p
i = output current, R = load impedance |
| Depth
limit |
20
- 30 ft (6 - 9 m) |
| Range |
5ft
- 3 mi (1.5m - 5 km) |
|
