 |
|
RF Voltmeter
- Voltage Range: 200µV to 3V (to 300V with optional divider). 8 ranges
- Frequency Range: 10Hz - 2.5GHz
- True RMS response below 30mV (to 3V with 100:1 divider)
- High impedance probe and accessories for measurements in 50 ohm or 75 ohm systems
to 1.2GHz, terminated or thru-line
- Optional 50 ohm terminated sensor to 2.5GHz with readout in voltage or power
- Optional low frequency probe for measurements between 10Hz and 100MHz
- Display in mV, dBm, dBr, dBmV, dBV, dBW, or x 100
- Second input channel and GPIB options
- MATE Compatible
Specifications
- Voltage Range: 200µV to 3V in 8 ranges (300V to 700MHz with a 100:1 Divider).
Indications down to 50µV
- Voltage Display: 1mV to 300V fs
- dB Range: 80 dB in 8 ranges, 0.01 dB resolution
- dB Display: dBmV (0 dB equivalent to 1mV), dBV (0 dB equivalent to 1V), dBW (0 dB
equivalent to 1W), dBm (0 dB equivalent to voltage drop generated when 1mW is dissipated
in selectable Z0 reference, 5 to 2000Ws)
or dBr (0 dB equivalent to any desired reference level. Reference level can be panel
selected to 0.01 dB resolution provided available display range of ±99.99 dB is not
exceeded.)
- Frequency Range: 10kHz to 1.2GHz. 100kHz to 2.5GHz when the optional Model
952009 Sensor is used and 10Hz to 100MHz when the optional Model 952016 Probe is used
- Waveform Response: RMS to 30mV, calibrated in RMS of a sinewave above 30mV
(RMS to 3V and 700MHz with a 100:1 Divider)
- Maximum AC Input: 10V, all frequencies and ranges
- Maximum DC Input: 200V, all ranges
- Recorder Output: 10V fs proportional to indicated voltage (mV mode) over each
range: 8V equivalent to 0 dBm regardless of Z0 (dB mode) with a
sensitivity of 1V per 10 dB change over the entire range
- Zero: Automatic, operated by panel key switch
- Display: 3½ digit LED display of voltage or dB. Auxiliary display,
uncalibrated, proportional to voltage (voltage mode) or dB (dB modes)
|
