Motorized, microprocessor based universal electronic tester designed for testing compressive/tensile strengths, yield and breaking strengths of various materials to it's capacity of 550 lbs.

Major Components

Motorized Test Stand -

• Standard travel speed is adjustable from 1" per minute to 12" per minute.
• Maximum, minimum, or variable speed may be selected.
• Standard vertical travel distance is 6" and is controlled by a heavy duty up/down switch.

Load Cell

Linear Potentiometer

Display cabinet with microprocessor and associated digital display -

• An integral printer may be activated by the console "PRINT" button.

Standard Accessories

• 550 lb. load cell
• Compression Plate lower: 6"wide x 3" deep
• Clevis grips and link

Mechanical

• Vertical opening - standard distance between compression plates is 20".
• Horizontal opening - clear opening between columns is 8".
• Crosshead speed - adjustable from 1" to 12" per minute standard.
• Crosshead travel - 6" standard.

Digital Displays 9/16 red LED

Deflection (5 Digits)

• in:  0-6.000 x 0.0001
• mm:  0-152.00 x 0.02

Overload Protection

Tare Adjustment

• Up to 10% of the maximum force of the range in use can be tared out using the pushbutton zero without affecting the net capacity of the tester
• Tare adjustment between 10% and 100% of capacity can be made via the same pushbutton with a resulting reduction in net capacity equal to the amount of the tare.

Analog Outputs

For Recorders with 0.5 M ohm Impedance minimum:

• Force:
  1. 0- ± 550 lb. =  0-  ± 5.7 Vdc (approx.)
  2. 0-  ± 110 lb. =  0-  ± 1.1 Vdc (approx.)
•    Deflection:  0- 6" = 0-  ± 5.6 Vdc (approx.)

Weight

• Instrument  80 lbs. (approx.)

Please contact us for more information on the Chatillon UTSE-2