|
Portable Clamp-On Multifunction Ultrasonic Flowmeter
System 1010P/WP is a non-intrusive portable ultrasonic flowmeter which provides highly accurate
measurements of liquid flow over awide range of
flow rates and liquid types. The1010P/WP is capable
of measuring volumetric fllow, mass flow and HVAC
thermal energy .
The Clamp-On Transducers used with the 1010P/WP support all pipes sizes. The Clamp-On method of
transducer installation provides the advantages of
easy installation, no cutting of the pipe, low maintainence and no
pressure drop.
System 1010P/DP provides accurate
measurement of volumetric flow rates for a wide range of applications
including:
- Batch totalization control
- Flow rate control
- Thermal Energy custody transfer
- Pump and valve monitoring
- Detection of aeration, entrained water, solids and gas in products
Common Specifications
Typical Performance on 6 in. schedule 40 pipe
- Flow Range
.........................±1-40 ft/sec
- Liquid.....................................
Any Sonically Conductive Liquid
- Calibratable Accuracy ...........0.5%
- Repeatability..........................0.15%
- Slew Rate .............................
80 ft/sec2
- Zero Drift
.............................. <0.05 ft/sec
- Response Rate (adjustable)
Time Damping ..................... 1-60 sec
Smart Slew .......................... 1 sec - 1 hr
- Flow Computer
Operating Temp. Range........ 32°F -120°F
Battery life.............................up to 24 hours
- Maximum Liquid Temp..........450°F
Input/Output Specifications:
- Power: 10.5 - 18.5 VDC
- Digital Inputs: 2 per channel
- Digital Outputs (TTL level): 2 per
channel
- Analog Inputs (0-10volt): 2 per channel
- Analog Inputs (4-20mA): 2 per channel
- Analog Output (4-20mA): 2
(user-powered)
- Analog Output (0-10VDC): 2
- Pulse Output (0-5KHz): 2
- RTD Temp: 2
- RS232C: Up to 9600 bps
|
