Probes:
- CT-10 Clamp-on CT
Rated 1-10Amps AC
Frequency response: 45Hz-3kHz
Jaw Opening: 0.47"
- CT-150 Clamp-on CT
Rated 0.25-150 Amps AC.
Frequency response: 45Hz to 3kHz.
Jaw Opening: 0.47"
- CT-300 Clamp-on CT
Rated 10-300 Amps AC.
Frequency response: 45Hz to 3kHz at stated accuracy.
Jaw Opening: 2.00"
- CT-1000 Clamp-on CT
Rated 50-1000 Amps AC.
Frequency response: 30Hz to 3kHz at stated accuracy.
Jaw Opening: 2.17"
- CT-3000 Clamp-on CT
Rated 100-3000 Amps AC.
Frequency response: 48Hz to 3kHz.
Jaw Opening: 2.56", bus bar 1.97" X 5.31" max.
|
Dranetz / BMI PP1 Portable Power Analyzer
Features:
- Channels: 8 - 4 Voltage and 4 Current
- Scope and Meter Modes
- Measure Power Quality, Harmonics, Energy, InRush, and
Flicker
- Measure V,I,W, VA,VAR,PF, Demand & Energy (TASKCard
8000)
- Cycle-by-Cycle Disturbance Capture (TASKCard PQPlus)
- Two Hour UPS
- Menu Driven Operation
- RS-232 Serial Interface
- Waveform (TASKCard PQPlus) and Simultaneous
Channel Capture
- Classifies Power Quality Disturbances to IEEE 1159 (TASKCard
PQPlus) and Voltage Flicker in Accordance with IEC-868 (TASKCard
Flicker)
- Time Plot Any Monitored Parameter
- Integral PC Memory Card Interface
Specifications:
- Voltage Range: 10 - 600 Vrms on 4 channels
- Voltage Transients: 50 - 6000 Vpk (requires TASKCard
PQPlus)
- Current Range: 10 - 200% of full-scale current probe
rating (below)
- Current Transients: 10 - 300% CT full scale except
channel D which is 2 - 200% CT full scale (requires TASKCard PQPlus)
- Frequency Range (fundamental): 30 - 450 Hz
- Update Rates: Once per second (Harmonic based-perameters
updated every 5 seconds)
- Battery Life: 2 hours
|
|
