 |
EMC-Partner ESD3000 System for Contact Discharge (CD)
up to 30 kV and Air Discharge (AD) up to 32
kV
The EMC-Partner
ESD3000 is a light weight, hand-held battery operated tester. The modular
construction enables many different test
standards to be performed by simply changing the module.
A broad range of accessories enable testing to many applications for
contact discharge, air discharge and indirect
discharge.
The easily
interchangeable discharge modules (DM) quickly adapt the ESD3000 to the
specified circuits of a new application. Each new
module fitted to the ESD3000 is automatically
identified and the corresponding program displayed. Modules can be configured
to meet requirements for special component values but also so that the
waveshape is correct using the defined calibration
method. The modules contain all the high
voltage circuits making the ESD3000 the ONLY ESD system capable of fully
conforming to different calibration requirements.
EMC-Partner
ESD3000 Features:
- 32 kV contact discharge
level
- Single impulse mode
- Simple operation
- Parameter change during
operation using + and - keys
- Internal program memory
- Backlit LCD display
- Electronic polarity
change
- Light weight
- Battery operation
- Compact design
- Fulfills ALL standard
requirements
- Wide range of Discharge
Modules (DM)
- Individually calibrated
discharge modules (DM)
- Standard (0.7 - 1 nS)
or Fast ESD (ca. 300 pS) events
- Remote control and
software upgrade through standard interface
EMC-Partner
ESD3000 Specifications:
- Discharge risetime:
depending on module type
- Air discharge:
0.2 up to 32 kV depending on module type
- Contact
discharge: 0.08 up to 30 kV depending on module type
- Voltage increment
resolution: 1 volt steps
- Contact discharge
repetition interval: 0.05 to 30 s
- Discharge detection:
every pulse or real discharges only
- Discharge counter: 1 to
29999
- Discharge polarity:
positive, negative and alternating
- Holding time: 5 s
- Programmable parameter
ramps: voltage, polarity
- Discharge trigger:
manual, automatic or remote
- Test report data from
TRA2000 or TEMAsoftware:sequence, number of discharges,
voltage,polarity
EMC-Partner
ESD3000 Standards:
CD up to max. 10
kV and up to level 4:
DM1: IEC/EN 61000-4-2 (10/16kV)
DM2: ISO 10605(E) (+/- 10/16kV)
DM3: ISO 10605(E) ( +/- 0/32 kV)
DM4: MIL-883E ( +/- 10/16 kV)
DM5: DO-160D (+/- 0/32 kV)
DM6: IEC 61340-3-1 (+/- 8/0 kV)
DM7: IEC 61340-3-2 (+/- 2.5/0 kV)
DM8: EN50155 (10 kV, 0.05/0.1 µs)
Customised DM16C :
in general:
Cap: 100 pF up to 1500 pF
- Res: 0 up to 2 kOhm
- manufactured:
- DM16C-VW:
Cap: 1500 pF
Res: 2200 Ohm
- DM16C-AUDI:
Cap: 330 pF
Res: 330 Ohm
Legend:
DM = Discharge Module
(x/y kV) = Voltage range CD and AD
CD up to max. 30 kV, level x:
(requires one RM and one DN)
RM32: RM for rise time 0.7 - 1 nS
RM32F: RM for rise time < 400 pS
DN1: IEC 61000-4-2, ANSI C63.16, RTCA/DO-160 (30/32kV)
DN2: ISO TR10605E (30/32 kV)
DN3: ISO TR10605E (30/32kV)
DN4: MIL-STD-1512 (30/32kV)
Customised DN32:
- in general:
- Cap: 100 pF up to 1000 pF
- Res: 0 up to 10 kOhm
- manufactured:
- DN32-RAIL:
Cap: 330 pF
Res: 100 Ohm
Waveform: <0.05/0.1 µs (8.4 kV)
Legend:
RM = Relay Module
DN = Discharge Network
(x/y kV) = Voltage range CD and AD
|
|
Keytek Series 2000
