Advanced Test Equipment Rentals spacer
Advanced Test Equipment Rentals
Request a Rental QuoteRequest a Sales QuoteRequest a Service QuoteContact Us
iso9001

spacer
  Home line Equipment line Manufacturers line Request line Contact Us line About Us line Events line Forms line Employment  
Home - EMI / EMC / RFI Test Systems
EMCO 3850-2
EMCO 3850-2 EMCO / ETS-Lindgren 3850/2 LISN

ETS-Lindgren Line Impedance Stabilization Networks (LISNs) are multi-line low pass filter networks used for conducted emissions measurement. LISNs isolate an electrically powered EUT from the external power source, stabilize line impedance (for repeatable measurements), and provide a 50-ohm RF connection to measure EMI voltage generated by the EUT. When line currents drawn by the EUT are too great for a LISN, Model 3701 Line Probe can be used for EMI voltage measurements. 

Features:
  • One Piece, Multi-Line Design for Convenience
  • Wide Frequency for Broad Measurement
  • Coils Matched to Application
  • Insulated Plugs for Safer Power Connections
  • RF Shielding to Minimize Intrusion
  • Individually Calibrated

Standard Configuration:

  • LISN assembly
  • Individually calibrated per ANSI C63.4.
    Actual factors and a signed Certificate of Calibration Conformance included in manual.
IEEE 291, IEEE 302, IEEE 1309, ANSI C63.4
10k-30kHz +/- 0.70 dB
30-100kHz +/- 0.47 dB
100k-10MHz +/- 0.25 dB
10-30MHz +/- 0.70 dB
30-100MHz +/- 1.16 dB

Electrical Specifications

POWER OUT
CONNECTOR
POWER IN
CONNECTOR
LINES PLUS
GROUND
FREQUENCY
RANGE
Superior ® Plug Superior ® Plug 2

9 kHz - 100 MHz

POWER
SOURCE
FREQUENCY

MAXIMUM
CURRENT

MAXIMUM
VOLTAGE

NETWORK
INDUCTANCE
IMPEDANCE

DC - 60 Hz 50 A
400 VAC Line - Line
220 VAC Line to Ground
50/250 µH, 50 ohms

1 Specialty Item. Call for pricing and availablility

2IEEE 291 - 1991, Institute of Electrical and Electronics Engineers, Standard Methods for Measuring Electromagnetic Field Strengths of Sinusoidal Continuous Waves, 30 Hz to 30 GHz.

IEEE 302 - 1969, Institute of Electrical and Electronics Engineers, Standard Methods for Measuring Electromagnetic Field Strengths Below 1000 MHz in Radio Wave Propagation.

IEEE Std 1309 - 1996, Institute of Electrical and Electronics Engineers, Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz.

ANSI C63.4 - 1992, American National Standard, Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz.

 

Please contact us for more information on the EMCO 3850/2


Agilent
E4437B

Agilent E4437B
Yokogawa
WT1600B


Yokogawa WT1600B
Anritsu
MS2026A

Anritsu MS2026a
Megger
DLRO-200-115

Megger DLRO-200-115

Teseq
NSG437
Varian 956 Porta Test
Solar
7054-1

Chauvin Arnoux 6121
Chroma
63209
Chroma 63209
Privacy Notice Site Map Terms of Use
Copyright © 1996-2007  |  Advanced Test Equipment Rentals  |  All Rights Reserved