 |
|
80 kHz - 2.7 MHz Solid State Amplifier, 400 Watts
The ENI / E&I AP-400B offers a choice of two power modes, leveled or unleveled. In the unleveled mode, the amplifier covers the frequency range of 80 kHz - 2.7 MHz with up to 400 Watts of power. In the leveled mode, the AP-400B offers the same frequency range and power output, with ±5% automatic forward or load power leveling. Power level adjustment is easily accomplished with either the front panel control or an externally-generated 0 - 10 Vdc signal. A rear-panel accessories connector provides TTL-compatible inputs and outputs for total remote control capability.
RF voltage levels and power output into the load are accurately monitored by the AP-400B's built-in linear power meter. Full-power operation over a wide range of temperatures and AC line conditions is ensured by a multi-tapped AC transformer and a forced-air cooling system. Frequently used in medical and industrial applications such as ultrasonics, induction heating, and laser modulation, the ENI / E&I AP-400B also provides RF power for plasma etching, sputtering, and deposition.
ENI / E&I AP-400B Specifications:
| Power |
400 Watts |
| Frequency Range |
80 kHz - 2.7 MHz |
| Gain Variation |
±1.5 dB |
| Drive Source Requirement |
1 mw output |
| Load Mismatch Tolerance |
Foldback at 100 Watts reflected power |
| Forward/Load Power Regulation |
±5% set power within foldback limits |
| AC Power Line (50 Hz - 60 Hz) |
105/120 VAC ±5% at 17 A |
| 200/230 VAC ±5% at 9 A |
| Forward/Load Power Meter |
0-500W |
|
