The Fujikura FSM-60S Fusion Splicer Kit sets
the standard for core alignment fusion splicers. The FSM-60S
is the fastest field splicer available, and can complete a splice and tube
heat in atotal of 30 seconds. Important features
include the smallest size and weight in the industryand
the legendary ruggedness Fujikura provides. The FSM-60S also includes user
friendly features such as calibration-free arc
adjustments (with AUTO splice mode), automaticfiber
type identification and reduced operational steps. The Fujikara FSM-60S also offers
increasedflexibility for various splicing tasks
with user-selectable front and back monitor positioning.
Fujikura FSM-60S Specifications |
| Parameter |
Value |
| Fiber
Splicing Capability |
SM,
MM, NZ-DS, DS, and other single mode fibers including ITU-T G.657 fibers |
| Splice
Loss |
0.02dB with SM fiber, 0.01dB with MM,
and 0.04dB with DS and 0.044dB NZ-DS fiber (all results typical) |
| Return
Loss |
>60dB |
| Fusion
Splices/Battery Charge |
BTR-08: 160 cycles (splice / tube heat) |
| Viewing
Method |
Two CMOS cameras and 4.1” color LCD monitor |
| Applicable protection sleeve |
60mm, 40mm and Fujikura FPS01 series |
| Operating Condition |
0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively |
| Operating
Temperature |
-40°C
to +80°C |
| Attenuation
Capabilit |
Programmable
from 1dB up to 15dB |
| Splice
Data Storage |
2000
splice data records |
| Splice
Modes |
Up
to 60 pre-programmed, 40 user programmable (100 total) |
| Splice Protection SleeveHeater
Modes |
Up
to 20 pre-programmed, 10 user programmable (30 (total) |
