The HP / Agilent 71603B Error Performance Analyzer
consists of the following components:
- HP / Agilent 70001A System Mainframe
- HP / Agilent 70004A Color System Display
- HP / Agilent 70841B 3 Gbit/s Pattern Generator
- HP / Agilent 70842B Error Detector
- HP / Agilent 70311A 3GHz Clock Source
|
|
Error Performance Analyzer
- BERT
Features:
- High performance 100 Mbit/s to 3 Gbit/s pattern generation and
bit error ratio (BER) measurement
- 1 bit to 4 Mbit user programmable test patterns
- Low-phase-noise clock source
- User-programmable patterns up to 4 Mbits with screen-based
editor
- Capability to trigger anywhere in the pattern
- Variable clock/data delay
- True complementary outputs
- Automatic setting of data threshold and decision point
Specifications
- Bit Rate: 100 Mb/s to 3 Gbit/s
- Rise Time (20% to 80%): less than 90 ps
- Patterns: 27-1,
210-1, 215-1,
223-1, 231-1;
zero substitution; variable mark density; variable length user pattern
from 1 bit to 8 Mbits.
- Data & Data Outputs: ECL or variable 0.25V to 2 V
peak-to-peak amplitude into 50 ohms
- Clock/Data Delay: 1 ns; resolution 1 ps
- Data Input: 0.5 V to 1 V peak-to-peak amplitude
- Decision Threshold Range: +1 V to -3 V, resolution 1 mV
- Termination Voltage: 0 V or -2 V nominal, selectable
- Errors Detected: Errored ones and zeros and all logic errors
- Measurements: Error count, ratio; errored seconds, deciseonds,
centiseconds, milliseconds; and G.821 Analysis
|
