• Sensitivity to 10 microvolts per digit
• 3½ digit LED display

As an Autoranging Voltmeter

• Range: ±10 microvolts per digit (10mV full range) to ±100 volts full range in five decade ranges.  100% overranging to 1999 on all ranges
• Input Impedance: Greater than 2 x 10¹⁴ ohms shunted by 20 picofarads.  Input resistance may also be selected in decade steps from 10 to 10¹¹ ohms

As an Ammeter

• Range: ±10^-16 ampere per digit (10^-13 ampere full range) to ±0.1 ampere full range in 13 decade ranges.  100% overranging to 1999 on all ranges

As an Ohmmeter

• Range: 1 ohm per digit (1000 ohms full range) to 10¹⁴ ohms full range in 12 decade ranges.  100% overranging to 1999 on all ranges
• Method: Two-terminal constant-current.  Current equals reciprocal of OHMS range

As a Coulometer

• Range: ±10^-15 coulomb per digit (10^-12 coulomb full range) to ±10^-5 coulomb full range in 8 decade ranges.  100% overranging to 1999 on all ranges

As a Constant Current Source

• Range: 8 currents in decade steps from 10^-5 to 10^-12 ampere using OHMS ranges.  Hi terminal is positive
• Compliance: Up to 200 volts

General

• Display: 3 digits plus 1 overrange digit; decimal position, polarity, and overload indication; 5 readings per second
• Polarity Selection: Automatic
• Sensitivity Selection: Automatic
• Isolation: Circuit Lo to chassis ground; greater than 10⁹ ohms shunted by 500 picofarads
• Analog Outputs: Unity gain
• Connectors:
  Input: Teflon-insulated triaxial
  Analog Outputs: Unity gain, 1 volt chassis, Lo, and guard; binding posts