 |
|
ThermoKeytek 801-4H IEC-IEEE Burst Generator
The stand-alone, extended-range
ThermoKeytek 801-4H, meets and exceeds the EFT/NoiseTM burst generation
specifications of IEC 1000-4-4 (IEC 801-4), as well as the revised
ANSI/IEEE C62 .41 and other standard tests such as the EN 61000-4-4.
It incorporates a built-in coupler/decoupler (coupler/filter) for ac
power lines up to 277V, 50-60 Hz, to 16A.
The Keytek 801-4H provides the IEC-specified
bursts of 5 ns / 50 ns double exponential impulses. Totally repeatable
waveforms, high reliability and long life are key features of the design.
Voltage is adjustable from 250V to 8 kV - twice the IEC 801-4's
requirement of 4 kV.
For the Keytek Model 801-4H, repetition
rate is selectable to at least twice the IEC 1000-4-4 (IEC 801-4) -
specifications: 10 kHz to 4.4 kV, - and then 2 .5 kHz to 8 kV (twice the
IEC's maximum required voltage level). The burst length is from 1 to 20
ms; and burst repetition period is 0 .3s to 5s .
A covered, fully-interlocked capacitor
clamp, Model CCL 801, is available for coupling the EFT/Noise rm burst
into I/O lines (including data and signal lines). All clamp hinges use
nickel-plated, beryllium copper finger stock to insure excellent RF
performance over time.
| Specifications |
| Parameters |
Performance |
| Wave |
Unidirectional Impulse |
| Character |
5
ns/50 ns |
| Individual
or Burst |
Burst |
| Amplitude |
±0.25
to ± 8kV |
| Output
Zo |
50
ohms |
| Wave
Repetition freq. |
Selectable, to 10 kHz to 4.4 kV; 2.5
kHz to 8 kV |
| Burst
Duration |
1
ms to 20 ms |
| Burst
Repetition Period |
0.3s
to 5s |
| Coupler/Decoupler |
Internal |
| Capacitor
Clamp |
Model CCL-801, Optional |
| Synch
with Power Line |
Optional |
| Adjustable
Line Phasing |
Optional |
| External
Trigger |
Optional |
| 488-Bus
Control |
Optional |
|