| |
|
MiniZap ESD Test System
The Thermo KeyTek MiniZap is an ESD simulator which can be used for direct, indirect and diagnostic ESD testing. With the Keytek MiniZap, the manufacturers of computers and other semiconductor-based equipment can implement a meaningful, dependable, company-wide program of ESD simulation testing with results that correlate throughout the industry. The Keytek MiniZap generates simulation pulses which are real world, repeatable and correctable. The MiniZap simulator is totally integrated into one light-weight, hand-held unit that can be easily stored in any standard tool kit. Its mechanical design has gained total, worldwide user acceptance.
By interchanging plug-in tips, the
Keytek MiniZap allows you to meet both the IEC 61000-4-2 standard's
0.7 to 1.0 ns risetime, and to do "reality" - generating the
real, <200 ps ESD risetime, to see how well your products will really survive in their intended environment.
Specifications:
- Contact Mode Voltage Range: ±0.5 to >8 kV
- Air Discharge Voltage Range: ±0.5 to 15 kV
- Air Discharge: TRUE-ESD (<0.3 ns nominal risetime
up to 4 kV)
- Contact Mode: FR/CI standard
- RC Networks3: 150 pF/330 ohm standard
- Lock On: Standard
- Rep Rate: Single shot, 1/sec & 20/sec repetitive
operation
- HV Display: Digital LCD display measures actual HV at
the tip with 10V resolution, ~3% accuracy
- Ground Connect Warning
- Calibrators Available
- Battery Operated
- Weight: 29 oz (822 gm)
|
