|
|
RF Survey Meter
The Narda Model 8718 can satisfy the needs of almost anyone that needs to measure electromagnetic fields. It was designed with the new or occasional user in mind so that the most common mistakes cannot happen.
- No range changes-the meter automatically displays a numeric value over the probe's entire measurement range.
- No confusing scales-simply select the correct probe (the meter even makes you double check) and the meter will display the correct reading
- No difficult zeroing procedure-just touch one key
Even the occasional user will be able to make use of the Narda 8718's advanced features. Experienced surveyors can do everything with a single instrument- accurately and in considerably less time than with any other instrument.
Features
- Microprocessor-Based Design
- 4 Line x 20 Character Display
- One-Touch Zero
- Displays Fields in Any Unit:
mW/cm², W/m² , V/m, A/m, V²/m² , A²/m², pJ/cm³ and Percent of International Standards
- Intuitive Operation with Help Screens
- Sophisticated Data-Logging
- Time and Spatial Averaging with Data Storage
- Fiber Optic and Cable Inputs
- RS232 Interface
- Calculates Percent of Standard
- Small, Lightweight, Ergonomic Design
Specifications
| Display |
4 Line x 20 character alphanumeric dot matrix liquid crystal display with back light |
| Controls |
22 Key membrane keypad |
| Input/Output |
Probe cable input
Fiber optic link input
RS232 Input/Output
Probe RF Test Sources (dual frequency)
Recorder output |
| Zeroing |
One touch auto-zero |
| Measurement Range |
Single, 30 dB dynamic range
Bar graph autoranges or select one of three 20 dB ranges
Compatible with all Narda 8700 Series probes |
| Data Logging |
Log any data point with time/date
stamp from primary measurement mode
Log with time/date stamp and reference number
Continuous logging at user defined rate and duration for up to 24 hours |
|
