 |
|
4 Channel - 8 bit 200 MS/s
Digitizing Oscilloscope
- Inputs: Single-ended
* Coupling: AC, DC, GND (low freq. AC rolloff -3db, 1.6 Hz)
* Ranges (Full Scale): 60mV to 30V, 8 steps
* Impedance: 1 Megohm, 45 pF
* Zero Position Range: 0 to 100% Full Scale
- Safe Overload (all ranges): 350V (DC + AC peak)
- Vertical Resolution: 8-bits
- External Clock: 20 MHz (max)
- Digitizing Rate:
* Maximum: 200 MegaSamples per second (5 ns per point)
* Minimum: 500 Samples per second (2 ms per point)
- Record Length: 64K Samples per channel (256K Optional)
- Bandwidth (all ranges): 100 MHz (-3 dB)
- Rise Time (all ranges): 3.5 nS
- Filter (Switchable): 20 MHz (-3 dB)
- Digital Internal Trigger Range: Trigger Range=Input Range
- External Trigger Range: 12 Volts
- External Trigger Sensitivity: 200 m Vp-p to 12 V Full Scale
- External Trigger Frequency (Max) - External input (50% F.S.): 100 MHz
- Trigger Delay (Max)
* Pre-trigger: 99% of screen
* Post-trigger: 109 x Selected Time per Point
400S - Disk Drive Storage Module (available separately)
- SCSI bus driven, multiple disk drive peripheral accessory box
- A maximum of three disk drives can be installed in a single 400S system
- Fixed hard disk: 3.5", 40 M-byte formatted, SCSI interface
May also be available:
* Floppy disk drives (Maximum of two)
a) 5.25", double-sided, high density, soft sectored: 1.2 Megabyte formatted,
500 K-bits/sec
b) 3.5", double-sided, high density, soft sectored: 1.44 Megabyte formatted,
500 K-bits/sec
* Removable-media disk drive (Maximum of two)
a) IOMEGA Beta 44: 5.25", 44 M-byte formatted, SCSI interface
|