Panametrics 22DLHR Ultrasonic Thickness Meter

Specifications

• Thickness Measurement Range: 0.005-10" or 0.1-200mm.  Thickness range also depends on material and transducer type
• Thickness Resolution:
  

  0.01"	LOW	0.1mm
  0.001"	STANDARD	0.01mm
  0.0001"	HIGH	0.001mm

• Measurement Rate: 2 per second
• Velocity Calibration Range: 0.0300-0.551 in./uS; 0.762-13.999 mm/uS
• Differential Mode: Permits measurements relative to a preset nominal value
• Differential Mode Setpoint Range: 0-20" or 0-200mm
• Measurement Range (Differential Mode): 0.005-10" or 0.13-200mm
• Data Logger Functions: Unit will store, recall, clear and transmit via RS-232 up to 1000 thickness readings
• Output Format: Data is transmitted in a serial ASCII string
• Baud Rate: Selectable: 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, or 9600
• Output Connector: Ruggedized 6 pin modular telephone type
• Power Requirements: 6VDC (supplied from internal batteries) or 100-130VAC, 50-60Hz supplied to external charger provides unit operating power for all conditions of battery charge state including recharging
• Battery: 6V Rechargeable NiCad battery pack

Recommendations

(1)  For a more complete summary of thickness gage applications and contact transducer recommendations, contact your Sales Representative.
(2)  Note: Ranges are approximate and will vary depending on material sound velocity, surface condition, and attenuation.