Schaffner / Teseq CDN3083-S100

Manual High-Current Coupling Network

The coupling network Schaffner / Teseq CDN3083-S100 Manual High-Current Coupling Network is intended for use with surge generators. These generators produce high voltage test pulses with high energy.

The Schaffner / Teseq CDN3083-S100 Manual High-Current Coupling Network fulfills the requirements called for in the Surge standard IEC/EN 61000-4-5: 2005, including the new features concerning high currents as well as in the ANSI C62.45 standard and relevant standards.

Schaffner / Teseq CDN3083-S100 Features:

100 Amps per phase with generous overload capacity
For EUT power supplies up to 620 Volts
Complies with IEC/EN 61000-4-5 and ANSI C62.45
Easy upgradeable from IEC to ANSI coupling

Schaffner / Teseq CDN3083-S100 Specifications:

Pulse voltages/current	8 kV/4 kA max.
EUT power supply	Line-to-line or line-to-PE 620 Vrms; (max.440 Vrms for NSG 3040 and Modula) per Phase 100 Amps nom. continuous current; 0 – 60 Hz (max. 400 Hz with power loses)
EUT connectors	Screw-terminals, 230 Amps, up to 110 mm², AWG 4-4/0
Max. Temperature	70°C
Decoupling conditions	As per IEC 61000-4-5 and ANSI C62.45
Coupling modes	Surge Differential, Lines to PE, Common to PE (with ANSI coupling set or with optional INA 3080 for IEC)
Dimensions (L x D x H)	850 mm x 520 mm x 345 mm
Weight	80 kg approx.

Please contact us for more information on the Schaffner / Teseq CDN3083-S100 Manual High-Current Coupling Network

Featured Test Equipment:
Haefely ECOMPACT4 Transient Immunity Test	Voltech PM6000 Power Analyzer	IFI T4026-40 TWT Amplifier	Teseq NSG 438 ESD Gun	Solar 2654 Transient Generator