Advanced Test Equipment Rentals - Home Rentals - Sales - Service
Advanced Test Equipment Rentals
Toll Free: 1-800-404-ATEC (2832)
Follow ATEC on LinkedInFollow ATEC on YouTubeFollow ATEC on TwitterFollow ATEC on Facebook
Home - ESD/Pulsed EMI Compliance
Schaffner CDN 126
Schaffner CDN126 Capacitive Coupling Clamp

The Schaffner CDN126 Capacitive Coupling Clamp enables burst pulses to be coupled into an item of equipment under test (EUT) without an electrical connection to its inputs or outputs, the screened sheathing of associated cables or any other part of the EUT.

The coupling clamp is necessary for acceptance tests on 110 and communications ports. Mains inputs can also be tested, however, in cases where the direct coupling networks cannot be used.

The CDN 126 consists of a 1m long, metallic clamp designed to accommodate the cable to be tested. The return path is provided by a reference panel placed under the clamp. The configuration conforms with IEC 1000-4-4 (corresponding to IEC 801-4).

Specifications

Typical coupling capacitance between cable and clamp 50 to 200 pF
Suitable for round cable with a diam. of 4 to 40 mm
Insulation test 5 kV (1.2 I 50 I..Is pulse)
Max. permissible burst voltage 4.5 kV
Max. permissible spike rate 1500 per sec

Please contact us for more information on the Schaffner CDN 126


Featured Test Equipment:

Rent an Haefely ECompact 4 Transient Immunity Test Set

Haefely ECOMPACT4
Transient Immunity Test

Voltech PM6000
Voltech PM6000
Power Analyzer



IFI T4026-40
TWT Amplifier

Varian 956 Porta Test
Teseq NSG 438
ESD Gun

Solar 2654-1
Solar 2654
Transient Generator
Forms Terms & Conditions Privacy Notice Home Page Terms of Use
Copyright © 1996-2010  |  Advanced Test Equipment Rentals  |  All Rights Reserved