Photo Courtesy of Schaffner
|
|
Schaffner / Teseq Modula ESD Testing System
The Schaffner / Teseq Modula ESD Testing System is a new product line
for the simulation of electromagnetic interference effects. Immunity
testing in conformity with international, national and in-house standards
is handled with hitherto unimaginable efficiency and with greater operator
convenience than ever before. Besides the generation of the classic
interference pulses such as Burst and Surge as well as Power Quality
simulations, further functions can also be readily incorporated in the
system configuration. The Schaffner Modula represents a new yardstick for
pulse generators and systems intended for investigating the immunity of
products to electromagnetic interference.
The Schaffner / Teseq Modula ESD Testing System is a system concept that can appear
in various guises depending on the intended use and the market needs.
Industry-wide compatibility has been very much borne in mind in the
development of Modula. The use of the well-known Interbus as the internal
and external interface to every function unit, the Ethernet with the
TCP/IP protocol for PC and network links, IEC compatible connectors on the
equipment and EUT side, a software concept based on the Lab View standard,
running under Windows, provides the greatest possible freedom and
flexibility for expansion and for incorporation of available or planned
components into the system in the test laboratory.
Technical Specifications:
| MODULA
6000 Mainframe |
| Mainframe |
Table
top unit with rack mounting option - Handles in front and back |
| Instrument
Power |
85
- 265Vac, 47 to 63Hz; IEC-connector, Power Switch, Fuses |
Operating
elements/ Connectors
Back panel: |
EUT
supply: Harting connector with pins for power line and aux. supply,
Additional ground connector |
Operating
elements/ Connectors
Front panel: |
EUT connector IEC 320 / HV coaxial
connectors Surge High & Low
HV coaxial connector Burst - out / HF- ground connection
Drawer for mobile handheld controller with charging connector
Status LED's for power, pulse, high voltage, EUT supply, output
coupling, error |
| Safety
standards |
IEC
61010-1 Safety requirements for electrical equipment for
measurement, control and laboratory use |
| EMC
standards |
EN
61000-6-2 Electromagnetic compatibility: Generic standards -Immunity
for industrial environments |
| Master
Controller |
System controller for configuration,
real-time tasks, pulse library, test memory, user interface and
communication.
Connector for system enhancement (Interbus), Osc. trigger, EUT fail
signal, end of test signal and remote pulse trigger.
Comm. interface (Ethernet TCP/IP) RJ 45 and optical |
| Coupling
network |
Burst/Surge
coupling network according to IEC 61000-4-x. Up to 260 Vac or dc,
16A continuous, 25A short term |
| Standard
multifunction configuration |
| MODULA
6100 |
Multi-function generator for immunity
testing in accordance with the EN/IEC 61000-4-x series. With
Burst Generator EFT 6501, Surge Generator SRG 6501, Mains Drop-out
Simulator PQT 6501, mobile hand-held
controller MHC 6501, single-phase couping network CDN 6501 (260V/16A
ac/dc) including LAN (TCP/IP) interface. |
| Custom
configurations |
| MFR
6510 |
Modula mainframe incl. CDN 6501
(250V/16A ac/dc), with Mobile hand-held controller MHC 6501 and LAN
(TCP/IP) interface, ready to accomplish any combination of SRG 6501,
EFT 6501, PQT 6501. |
| EFT
6501 |
Burst
generator module for subsequent expansion. |
| PQT
6501 |
Mains
drop-out simulator module for subsequent expansion. |
| SRG
6501 |
Surge
generator module for subsequent expansion. |
|
