***Show with optional modules:
|
Teseq / Schaffner NSG 5500 Automotive Transient Immunity Test Set
The compact and modular Teseq / Schaffner NSG 5500 Automotive Transient Immunity Test Set solution offers the generators necessary for tests with capacitive discharge pulsed interference as called for by ISO, SAE, DIN and JASO, and others. The established test specifications for passenger cars together with the new standards for commercial vehicles published by these international and other bodies are fully covered, as are the most company-specific standards from vehicle manufacturers.
This compact mainframe houses the common system components and accommodates the standard pulse generators. All testing is available from one output connector. An electronic switch to connect and disconnect the battery supply is incorporate din the Schaffner NSG 5500. Additional inputs and outputs are located on the rear panel for test execution control purposes and the monitoring of error signals, oscilloscope triggers, gate start/stop commands, etc. Overall control is via a PC running under Windows.
Teseq / Schaffner NSG 5500 Specifications:
| Instrument power supply |
100 - 120VAC ±10%, 47 - 63Hz |
| 220 - 240VAC ±10%, 47 - 63Hz |
| Dimensions |
19" desktop housing (rack mountable), height 330mm (13"), depth 510mm (20") |
| EUT supply |
From an external source, e.g. battery or PA 5840 power amplifier/battery simulator |
| Computer interface |
IEEE 488 (recommended) or RS232 |
| Auxiliary input signals |
DUT FAIL / START-STOP |
| Auxiliary output signals |
CRO-TRIG / TEST-END |
| Input DC voltage range |
60V max. |
| DC current |
100A (250A for 200ms) |
| Switch On/Off time |
2μs |
| Optional Modules |
MT 5510 |
Transient generator ISO pulse 1, 2, 6 and variants |
| LD 5505 |
Load dump generator |
| FT 5530 |
EFT generator ISO pulse 3a/3b and variants |
| CDN 500 |
Capacitive coupling clamp |
|
