The Model 7054-1 Spike Generator was especially designed for screen room use in applying high voltage transients at power line inputs to electronic equipment. The adjustable amplitude makes it possible to determine the threshold of susceptibility to spikes appearing on the power line. The Model 7054-1 may be used for performing tests per Method CS06 of MIL-STD-462, Method 5006.1 of MIL-STD-826A, RTCA D0160D (with impedance matching transformer) various missile specifications and others.

• Provides output levels from 10 volts to more
  than 600 volts into 5 ohms or less. Delivers
  more than 300 kw peak into 0.5 ohm load.
• Adjustable pulse position on a.c. lines relates
  the transient susceptibility to real time aspects
  of digital systems.
• Single pulse feature for controlled isolation of
  transient effects.
• Output terminals for series or parallel
  injection.

• Spike Amplitude: Continuously adjustable from 10
  volts to over 600 volts peak.
• Repetition Rate: Continuously adjustable from 0.8
  to 10 p.p.s.
• Rise Time: Less than 1.0 microsecond, into 5 ohm
  resistive load.
• Spike Duration: Output falls to zero in approximately
  10 microseconds.
• Spike Shape: See curve. Similar to Figure 19 of
  MIL-STD-462
• Phase Adjustment: Spike position adjustable from 0°
  to 360° periodically on 50, 60 or 400 Hz sine wave.
• Internal Impedance: Less than 0.5 ohm.
• Output Power: More than 300 kw peak into 0.5 ohm load.
• Power Current in Series Injection
• Mode: Handles up to 25 amperes of current at power
  frequencies.
• Power Requirements: 115 volts 60 Hz, 1.6 amperes. (230
  volts 50 Hz, 0.8 ampere available. )
• Size:Standard rack panel: 7" high, 19" wide, 12.75" deep.
  (17.78 cm x 48.26 cm x 32.38 cm.)

Please contact us for more information on the Solar 7054-1

Haefely ECOMPACT4

CA Instruments 5001ix

Voltech PM6000

IFI T4026-40

Teseq NSG437

Solar 2654-1