Solar 9355-1 Pulse Generator
for MIL-STD461D/E CS115 susceptibility test
The charged line potential of the Solar
9355-1 is adjustable from less than 2 volts to greater than 2000 volts.
The repetition rate is variable from less than 0.6 p.p.s. to greater than
150 p.p.s., or single pulses manually triggered by a panel mounted push
button. Digital displays monitor the charging voltage and pulse repetition
rate. This unit can also be used as an impulse calibrator to provide an
adjustable spectral output up to 150 dB V/MHz over the frequency range of
1 KHz to 10 MHz constant within +1 dB.
The Solar 9355-1 Pulse Generator is
designed to provide impulse excitation by means of an injection probe
placed around interconnecting cables or power wires. The unit uses a
charged transmission line (50 ohms) to generate a pulse with less than 2
nanoseconds rise and fall time, and duration of approximately 30 nS,
calibrated in a 50 ohm fixture to deliver up to 5 amperes at a rate of 30
p.p.s. for one minute as required by MIL-STD-461D/E, test method CS115.
Features:
-
Panel-mounted digital meters
monitor the adjustable charged line voltage and pulse repetition rate.
-
Adjustable pulse rate from 0.6
p.p.s. to 150 p.p.s., and manual triggering via front panel push button.
-
Charged line output voltage
adjustable from 1.0 V to >2000 V.
-
Pulse generator with spectral
output calibrated in terms of dB V/MHz into a 50 ohm load.
Specifications:
Output Phase
Charging Voltage: Adj. from 0 to 2000 volts
Rise/Fall Time: <2 nanoseconds
Duration Time: 35 nanoseconds
Pulse Repetition Rate: 0.6 p.p.s. to 150 p.p.s.
Polarity: +selectable
Output Load: 50 + j 0 ohms
Spectral Output
Frequency Range: 1 KHz to 10 MHz
Output Level into 50Ω: Up to 150 dB V/MHz
Output Flatness: +1 dB |
