 |
|
T-Berd T-Carrier Analyzer
- Automatic configuration and results summary
- Automated sequences of test patterns for one-step circuit qualification and
stress tests
- Pulse shape analysis, signal level and frequency, simplex current, and wander
measurements
- Out-of-band ESF loop codes standard
- Wideband and high band jitter measurement
Specifications
- Input and Output Connectors: Bantam, WECO 310, 15-pin D, BNC
- Input Impedance:
* Bridge: ≥ 1000 ohms with ALBO
* Term: 100 ohms with ALBO
* DSX-MON: 100 ohms with AGC
- Receive Level
* Bridge or term: +6 dBdsx to -35 dBdsx (T1), +3 dBdsx to -6 dBdsx (T1C)
* DSX-MON: +6 dBdsx to -24 dBdsx (T1), +3 dBdsx to -24 dBdsx (T1C)
- Level Measurement: +6 dBdsx to -40 dBdsx; +6 to -6, 0.1 dB resolution; -6 to -40,
0.5 dB resolution
- Frequency Measurement: 1 Hz resolutions; 5 ppm accuracy
- Transmit Timing Sources: Internal Clock, External Clock, Reference Clock,
Recovered Clock
- Line Codes: AMI, B8ZS
- Loopback Codes: CSU, CSU Line (ESF), CSU Payload (ESF), NIU (FAC1, FAC2, FAC3),
NIU Network (ESF), Programmable (3 to 8 bits), Intelligent Repeaters
- Pulse Masks: CB 119 (ANSI T1.102), ANSI T1.403-1989
- Wander Measurement: +99999 UI, 1 UI resolution
- Power Requirements: 115 VAC ±10%, 50 to 60 Hz
- Optional Accessories: 40849-01: T-BERD T1 Channel Monitor
|
