| Home - Oscilloscopes |
| Tektronix 2236 |
|
| Counter - Timer - DMM |
| Parameters Measured |
- Frequency
- Period
- Width
- Delay Time
- Delta Time
- Totalize
- DC Volts
- RMS AC Volts
- Ch 1 Volts
- Resistance
|
| Temperature (optional) |
Uses P6602 Temperature Probe |
| Multimeter Input |
Isolated from oscilloscope ground, 10 M ohm Input Impedance |
| Maximum Input |
500 V (dc + peak ac) for all functions |
|
|
100 MHz Counter/Timer/DMM Dual Trace Oscilloscope
- 2 channel analog oscilloscope
- Makes accurate counter without additional equipment
- External DMM input
| Vertical System (two identical channels) |
| Bandwidth (-3 dB) and Rise Time |
100 MHz and 3.5 ns, derated to 90 MHz at 2 mV/div |
| Deflection Factor |
2 mV to 5 V/div |
| Display Modes |
CH 1, CH 2, CH 2 Invert, Add, Alternate, Chop (500 kHz) |
| Input R and C |
1 M ohm, 22 pf |
|
| Horizontal System |
| Sweep Rate |
A Time Base: 0.5 s/div to 0.05 µs (to 5 ns/div with 10X Mag) |
| B Time Base: 50 ms/div to 0.5 µs (to 5 ns/div with 10X Mag) |
| Display Modes |
A, Alternate (A intensified and B delayed) and B |
|
| Calibrated Sweep Delay |
| Delay Time Range |
Continuously variable with 10-turn control from<0.5 + 300 ns to
>10 div. |
|
| X - Y Operation |
| Deflection Factors |
Same as scope's vertical system |
| Bandwidth |
Y-Axis: same as scope's vertical system |
| X-Axis: 2.5 MHz |
|
| Triggering |
| Sources |
Channel 1/2, external (B only int) |
| Modes |
TV Trigger, Bandwidth Limiting, HF Reject, LF Reject |
|
|
