Options

• Option 01: Digital Multimeter
• Option 05: TV Waveform Measurement System
• Option 06: Counter/Timer/Trigger
• Option 09: Counter/Timer/Trigger and Word Recognizer
• Option 10: IEEE-488 GPIB Interface

• 350 MHz Bandwidth
• 1 ns Rise Time
• Auto Setup
• Save and Recall Setups
• Set-up Sequencing
• On-Screen Trigger-Level Readout
• Volts and Time Cursors with On-Screen Readout
• Cursors After Delay
• Four Independent Channels
• Switchable 1 Mohm and 50 ohm Inputs

Characteristics

• Vertical System
  * Display Modes: CH1, CH2, CH3, CH4, Add (CH1 + CH2); Invert (CH2 only); Alternating and Chopped display
• Channel 1 and Channel 2
  * Deflection Factor: 2 mV/div to 5 V/div
  * Frequency Response (-3 dB Bandwidth): 350 MHz
  * Step Response: ≤ 1 ns (Rise times calculated from tr=0.35/BW)
  * Input Z: 1 Mohm or 50 ohm
• Channel 3 and Channel 4
  * Deflection Factor: 100 and 500 mV/div
  * Frequency Response: same as Channel 1 and Channel 2
  * Input Z: 1 Mohm
• Horizontal System
  * Display Modes: A (main sweep), A INTENsified, ALTernate A Intensified with B (delayed sweep) and B. In X-Y mode, Channel 1 provides X-axis (horizontal) deflection
  * A Sweep Time Base Range: 500 ms/div to 5 ns/div in a 1-2-5 sequence of 25 steps (X10 magnification extends fastest sweep rate to 500 ps/div
  * B Sweep Time Base Range: 50 ms/div to 5 ns/div in a 1-2-5 sequence of 22 steps (X10 magnification extends fastest sweep rate to 500 ps/div)
  * DT Readout Resolution: either 10 ps or 0.025% of full scale, which ever is greater
  * DT Range-With Cursors: ±10 times the A Sec/div setting
  * Sweep Delay Range: 0 to 9.95 times the A Sec/div setting for settings from 500 ms/div to 10 ns/div
• Triggering
  Trigger Modes from CH1 or CH 2 Source: DC Coupled; Noise Reject Coupled; HF Reject Coupled; LF Reject Coupled; AC Coupled
• X-Y Operation
  * X-Axis Deflection Factor Range, Variable Range and Accuracy - Same as Channel 1
  * X-Axis Bandwidth - DC to 3 MHz
• Cursor and Front-Panel Display
  Cursor Position Range: DVolts: At least the center 7.6 vertical divisions. DTime: At least the center 9.6 horizontal divisions