Tek
2465BDV shown above.
Accessories: Two 10x Probes, Accessory Pouch, Operators Manual,
Power Cord
Instrument Options
- Opt. 05: Video Waveform Measurement System for bi-level sync formats
- Opt. 06: Counter/Timer/Trigger
- Opt. 09: Counter/Timer/Trigger with Word Recognizer
- Opt. 10: IEEE-488 GPIB Interface
|
|
4 Channel Analog Oscilloscope
- Four Channels
- 400 MHz Bandwidth
- Auto Setup
- Automatic Measurements
- Save and Recall Front-panel Setups
- Cursor
Characteristics
- Vertical System
* Deflection Factor: 2 mV/div to 5V/div, (CH 1 and CH2). 100mV/div and 500
mV/div (CH3 and CH4)
* Frequency and Step Tr Response (-3 dB Bandwidth)/(Tr=0.35/BW) - BW/Rise Time: 400
MHz/0.875 ns (≥ 5 mV/div), and 350 MHz/1 ns (2 mV/div)
* Bandwidth Limiter: Reduces upper -3dB to 20 MHz
* Input Coupling and Max Voltage: (1 Mohm) AC, DC, GND; Max input voltage: 400 V
(DC + peak AC). (50 ohm) Max input voltage: 5 V RMS
* Input R and C: 1 Mohm and 15 pF or 50 ohm (nominal)
- Horizontal System
* Display Modes: A (main sweep), A INTENsified, ALTernate, A INTEN with B (delayed
sweep) and B. In X-Y mode, CH 1 provides X-axis (horizontal) deflection
* A Sweep Time Base Range: 500 ms/div to 5 ns/div (to 500 ps/div with X10
magnification)
* B Sweep Time Base Range: 50 ms/div to 5 ns/div (to 500 ps/div with X10
magnification)
- Automatic Measurements: Period; Volts; Rise time, Fall time; Time A-B (from % to
%); Time A-B (between two voltages); Pulse Width
- Triggering: A and B Trigger Coupling: DC, Noise Reject, HF Reject, LF Reject, AC
- X-Y Operation
* X-Axis Deflection Factor Range, Variable Range, and Accuracy: Same as CH 1
* X-Axis Bandwidth: DC to 3 MHz
|
