Current Probe A6303

Current Probe A6302

• Displays Current Signals on an Oscilloscope
• Current Range, Maximum Current, and Bandwidth Determined by the Probe.
• Allows display of current on any oscilloscope with 10 mV/div sensitivity, 50 ohms or 1 M ohm input.
• Bandwidth can be set to Full (where it is limited by the probe in use) or to 5 MHz.
• Coupling can be switch selected to ac or dc.

Specifications:

• Maximum Input Current - 20 A (dc + peak ac) for A6302; 100 A (dc + peak ac) for A6303.
• Maximum Voltage for Current Under Test (Bare Conductor) - 500 V (dc + peak ac) for A6302;  700 V (dc + peak ac) for A6303.
• Bandwidth (-3dB) - Dc to at least 50 MHz with A6302;  Dc to at least 15 MHz with A6303.
• Rise Time (Full Bandwidth) - 7 ns or less with A6302;  23 ns or less with A6303.
• Deflection Factor - 1 mA/div to 5 A/div for A6302;  20 mA/div to 50 A/div for A6303.  In a 1-2-5 sequence for both probes.