CHARACTERISTICS

Test Signal Generator

• Sampling Frequency
  Luminance Channel: 13.5 MHz
  Color Difference Channels: 6.75 MHz
• Digital Coding: 10-bit or 8-Bit linear PCM in all channels

Parallel Digital Interface

• Output Format: Balanced ECL (10K series); 10 data pairs, 1 clock pair, system ground, chassis ground
• Interface Clock: 27.0 MHz

Serial Digital Video Interface (Opt 1S)

• Digital Format: CCIR 601 Component; 525/60 or 625/50; 8-bit or 10-bit Data; Scrambled NRZI
• Bit Rate: 270 Mb/s
• Outputs: Number of Connector: 4/BNC

Embedded Audio

• Number of Channels: 4
• Frequency: 1 kHz, 800 Hz or silence

Clock Outputs

• Luminance Channel: 13.5 MHz
• Color Difference Channels: 6.75 MHz
• Connector: BNC

Sync Generator

• Line and Field Rates: 525/60 or 625/50 (user selectable)
• Black Burst - 2 Outputs: NTSC in 525/60 mode PAL in 625/50 mode

Features

• Conforms to ITU-R BT. 601/656, EBU Tech 3267, and SMPTE 125M, 259M, and RP165
• 10- or 8-Bit Signal Generation
• Parallel Digital Video Test Signal Outputs
• Four Serial Digital Video Outputs (Opt. 1S)
• Separate Y, B-Y, R-Y Clock Outputs
• 525/60 and 625/50 Operation
• NTSC or PAL Black Burst Outputs
• Sync Lock to 525/60 or 625/50

Applications

• D1 VTR and Other 4:2:2 Component Digital Equipment Testing and Maintenance

Test Signal Generator

• SMPTE color bars
• Color bars (100% and 75%)
• Pluge
• 5-step
• Ramp
• Limit ramp
• Valid ramp
• Modulated ramp
• Light blue shallow ramp
• Shallow ramp
• Shallow ramp matrix
• Pulse and bar
• Field square wave
• Co-siting verification
• Multipulse
• Multiburst
• Full and reduced amplitude sweeps
• Bowtie timing
• 50% flat field
• Convergence pattern
• Digital/analog blanking markers
• Digital gray
• Super black
• APL: high, low and bounce