 |
|
Tektronix TDS6804B Digital Storage Oscilloscope
The Tektronix TDS6000 Series digital
storage oscilloscopes provide unprecedented performance along with a
complete feature set designed to address design validation, debug and
compliance challenges of next generation computer, datacom and
communications equipment. High bandwidth, high sample rate and deep memory
also provide the ideal solution for data acquisition applications.
Features & Benefits
-
Bandwidth of 8 GHz
-
Rise Times to 19 ps 20 to 80% (28 ps 10
to 90%) on TDS6154C Typical Rise Time, with Channel matched,
User-selectable DSP
-
40 GS/s Real-time Sample Rate on Two
Channels, 20 GS/s Realtime Sample Rate on All Four Channels with 500
fs/Sample Interpolated Points
-
Up to 64 Megasamples on Two Channels,
up to 32 Megasamples Record Length on All Four Channels with MultiView
Zoom Function for Quick Navigation
-
Pinpoint Triggering Provides the
Most Flexible and Highest Performance Triggering, with Over 1400
Combinations to Address Virtually Any Triggering situation
-
Serial Pattern Triggering up to 3.125
Gb/s With 8b/10b Protocol Triggering
-
Serial Data Analysis and Compliance at
Rates of 6.25 Gb/s and Above
-
OpenChoice® Software with Windows XP
OS Delivers Built-in Networking and Analysis
-
Technology-specific Software Solutions
Provide Built-in Domain Expertise for Serial Data, Jitter, Ethernet,
DVI, USB 2.0, Communications and Power Measurements
-
System Includes: Dual Processor System
(2.8 GHz Pentium 4 and 583 MHz PowerPC), High Resolution XGA Display,
Front Panel CD-R/W, Front Panel USB 2.0 Port, and 1000Base-T Network
Connection
Applications
-
Signal Integrity, Jitter and Timing
Analysis
-
Validation, Debug, Characterization and
Compliance of Next-generation Digital Designs
-
Computer, Datacom, Storage Area Network
Equipment Designs and High-speed Backplanes
-
High Energy Physics Measurements and
Data Acquisition
Characteristics / Specifications:
| Vertical
System |
| Input
Channels |
4 |
| Bandwidth,
Rise Time (DSP) |
8
GHz
50 ps (10 to 90%) (typical)
35 ps (20 to 80%) (typical) |
True
Analag Bandwidth
(-3db), Typical Rise Time |
7
GHz
62 ps (10 to 90%) (typical)
43 ps (20 to 80%) (typical) |
Hardware
Bandwidth Limits
(Requires TCA-1 Adapter) |
Full,
250 MHz or 20 MHz |
| Input
Coupling |
DC,
GND |
| Input
Impedance |
50
Ω +2.5% |
| Input
Sensitivity, 50Ω |
Full
scale 100 mV to 10 V (10mV/div to 1 V/div).
Full scale is the peak-to-peak digitizer range at a given
sensitivity.
Volts/div = Full scale / 10 |
| Vertical
Resolution |
8-bit
(>11-Bit with averaging) |
| Max
Input Voltage, 50Ω |
<1Vrms
for <100mV/div,
<7Vrms for ≥100mV/div settings.
Also determined by TekConnect accessory |
| DC
Gain Accuracy |
+(2.5%
+ (2% x offset)) |
| Position
Range |
+5
divisions |
| Offset
Range |
Full
scale settings:
100mV to 500mV: +0.5V
505mV to 995mV: +0.25V
1V to 5V: +5V
5.05V to 10V: +2.5V |
| Offset
Accuracy |
+(0.5%
of channel offset + 15mV + 0.1 div x V/div setting) for ranges >
100 mV/div |
| Timebase
System |
| Timebase
Range |
25
ps to 40 s/div; interpolation down to 500 fs/pt |
| Timebase
Delay Time Range |
5
ns to 250 s |
| Channel-to-Channel
Deskew Range |
±75
ns |
| Trigger
Jitter (RMS) |
<1.5
psRMS (typical) |
Long-term
Sample Rate
and Delay Time Accuracy |
2.5
ppm over any ≥100 ms interval |
| Clock
Stability |
<1 ppm (typical)
<2.5 ppm (guaranteed) |
| Jitter
Noise Floor |
420
fsRMS (typical) over 2 µs duration or less |
| Delta
Time Accuracy |
635
fsRMS over <100 ns duration, single shot |
| Acquisition
System |
| Max
Sample Rate |
20
GS/s on 4 channels |
| Equivalent
Time Sample Rate (max) |
2
TS/s |
| Maximum
Record Length per Channel |
32
M (requires Opt. 4M) |
| |
Standard |
2
M on all 4 channels |
| |
with
Memory Opt. 2M |
8
M on all 4 channels |
| |
with
Memory Opt. 3M |
16
M on all 4 channels |
| |
with
Memory Opt. 4M |
32
M on all 4 channels |
|
