 |
|
Voltech PM3000A Single or 3 Channel Universal Power Analyzer
- 0.05% basic accuracy
- Universal application: -single- phase, three-phase, and DC rectifier measurements
- Harmonic analysis of voltage current and power on each phase and neutral to the
99th harmonic
- Accurate with distorted waveforms and poor power factors
- Built-in integrator for measuring energy maximum demand or averaged values
- Exceptionally wide input ranges on voltage (0.2 to 2000Vpk) and current (10mA to
200 Apk)
- Measures short term events, such as start-up current and burst power
- Accepts inputs directly or from external shunts, current transformers and voltage
transformers
- Provides eight programmable outputs for chart recorders or scopes
- Wide frequency range: -DC to 1MHz
- Full system capability with IEEE488.2, RS232 and Centronics interfaces as
standard
Basic Measurements
Real Power; Apparent Power; Reactive Volt-Amperes; Voltage; Current; Power Factor;
Peak Voltage; Peak Current; Voltage Crest Factor; Current Crest Factor; Impedance; Peak
Inrush Current.
Note: This model is also available in a single phase only
(single channel) version. Consult your sales representative for assistance in
selecting the correct model for your application.
Specifications:
- Voltage (V)
* Ranges (Auto or Manual)(12 ranges 1-2-5 sequence): 0.5V to 2000Vpk (1400Vrms)
* Frequency Range: DC and 0.1Hz to 500kHz
- Current (A) Ranges (Auto or Manual)(12 ranges 1-2-5 sequences): INT: 0.05A to
200Apk (30A rms); EXT: 6.25mV to 2.5pK (1.5Vrms)
- Power (W) Ranges (Auto or Manual)(144 ranges corresponding to V and A): 25mW to
400kW pk (with scaling to 100,000MW)
- Apparent Power (VA) Ranges (Auto or Manual)(144 ranges corresponding to V and A):
25mVA to 400kVA pk (with scaling to 100,000MVA)
- Reactive Power (VAR) Ranges (Auto or Manual)(144 ranges corresponding to V and
A): 25mVAr to 400kVAr pk (with scaling to 100,000MVAr)
- Power Factor (PF) Range: ±0.000 to ±1.000
- Crest Factor Range: 1.000 to 19.999
- Inrush Current Range: 0.1A to 200Apk (with scaling to 20 MA)
- Impedance Range: 0.0001 ohm to 9.999 Mohm
- Frequency Range: Internal Source 5Hz to 1MHz
- Harmonic Analysis Range: DC and Fundamental to 99th harmonic for voltage and
current. Maximum harmonic = 1MHz
- Integrator Range: 0.001 W.hr to 100,000MW.hr
* please consult your sales representative about the
availability of the single and three phase models |
