RM-5 70 MHz radio-link measuring setup
comprising: RMS-5 generator BN916/.. and RME-5 receiver BN 917/.. Sweep frequencies: 18
and 70 Hz.
| Test
Frequencies |
Order
Num |
Series I: (kHz)
27.778
55.556
92.593
277.778
555.556 |
Series II: (kHz)
25
50
83.3
250
500 |
2.4 MHz |
3.580 MHz or 3.579545 MHz |
4.430 MHz or 4.433619 MHz |
5.6 MHz |
| S |
|
S |
R |
R |
S |
BN 916/11
BN 917/11 |
| |
S |
S |
R |
R |
S |
BN 916/12
BN 917/12 |
S = Standard
R = Color subcarrier (on request) replaces the 2.4 or 5.6 MHz test frequency. |
|
Radio-link Measuring Setup 35/70/140 MHz
IF
RMS-5 Generator & RME-5 Receiver
- IF range: 70 ± 30MHz
as options: 140 ± 50MHz and/or 35 ± 5 (10) MHz
- Seven test frequencies between 25kHz and 5.6MHz
- Sweep frequencies: 18 and 70Hz
- IF and BB distortion measurements
- Group delay distortion
- Non-linearity distortion
- Differential phase
- Differential gain
Other IF measurements and parameters
- Attenuation/frequency distortion (IF-to-IF frequency response)
- Attenuation/frequency distortion
- IF return loss, with RFZ-1 return loss bridge
- "Yexternal" (eg. for RF detector signals)
- IF level (at center frequency F0)
- Test frequency deviation
- Sweep width
- Frequency markers
- Center frequency
- IF counter for unswept IF signals
- Spectrum mode - for setting the sensitivity of modulators and demodulators
Further BB measurements
- BB level for unswept signals between 10kHz and 12.5MHz
- BB return loss - for unswept sinusoidal signals between 75kHz and 12.5MHz (using
RFZ-1 return loss bridge)
Approx Weight
RMS-5 Generator: approx. 13 kg
RME-5 Receiver: approx. 19.5 kg |
