Wavetek 296 50 MS/s Synthesized Multichannel Arbitrary
Waveform Generator
The Wavetek 296 combines sophisticated
performance with ease of use in a way previously not available in
arbitrary waveform generators. The Wavetek 296 includes advanced waveform
sequencing capability up to 4,096 waveform segments for complex waveform
generation. It also provides a 16 bit digital output on each channel. It
can contain up to four separate channels. When run independently, each
channel is essentially a stand-alone arbitrary waveform generator. When in
master/slave mode, phase relationships between channels can be set by the
user.
Each channel outputs 15 Vp-p (into 50 W
load) at 50 MS/s sampling frequency maximum or can output 100 volts
peak-to-peak when Option 007 is installed (please consult your sales
representative for availability). Each channel has a high-speed clock
output that runs at a maximum of 100 MHz. Arbitrary waveforms can be
created and stored to nonvolatile RAM or on the standard MS-DOS
compatible 3.5-inch, high-density disk drive. In addition, ten commonly
used synthesized functions are built in.
Features:
- Up to 4 Independent Channels
- 10 Standard Functions (sine to 20 MHz,
square to 25 MHz)
- Up to 50 MS/s Sampling with 12-Bit
Vertical Resolution
- Waveform Sequencing of up to 4,096
Segments
- Frequency Control of Individual
Sequence Segments
- 16-Bit Digital Output to 50 MS/s
- Optional 100 Vpp Output
- Versatile Interchannel Triggering,
Summing and Phase Control
- Frequency Sweep
- Amplitude and Suppressed Carrier
Modulation
- Graphical User Interface
- Front Panel Waveform Creation/Editing
Tools
- Floppy Disk Drive
- GPIB and RS-232 Interfaces
- Compatible with Waveform DSP
- SCPI Compatible
|
