 |
|
Wavetek / Gigatronics 8502A Microwave Peak Power Meter
- 30 MHz to 40 GHz Frequency Range
- Graph Mode for Plot of Pulse Profile
- Full GPIB Control
Specifications
- Frequency Range: 30 MHz to 40 GHz depending on detectors (see PEAK POWER SENSOR
specifications)
- Power Range
* Pulse: -20 dBm to +20 dBm
* CW: -40 dBm to +20 dBm
(See sensor specifications)
- Time Base Range: 1.2 ns/div to 20 ms/div (12 ns to 200 ms time window), using
either the Data Entry Keyboard or the Control Knob.
* Resolution: 0.1 ns
- Trigger Delay Range: 0 to 200 ms using either the Data Entry Keyboard or the
Control Knob.
* Resolution: 0.1 ns
- Triggering Modes
* Internal: -10 dBm to +16 dBm
* External (BNC): TTL levels, Maximum PRF 1 MHz
- Markers: Up to 4 markers/channel plus a Reference Power Level cursor
- Graph Display Mode: Plots the outline of the detected pulse on the
electroluminscent display
- Input Channels
* 8501A: Single Channel
* 8502A: Dual Channel
- Auxiliary Outputs/Inputs (BNC)
* Monitor: Provides a voltage proportional to the detected RF envelope.
Risetime is typically 20 ns, output impedance is nominally 50W
* Analog Output: Provides a voltage proportional to
detected power. Scale Factor is 100 mV/dB
* Trigger Input: TTL
* RF Blanking: TTL open collector low during zeroing. Used to control power
source
* Voltage Proportional to Freq (V / GHz): Allows direct entry of frequency from RF
power sources equipped with a V µ F output
- GPIB Interface
PEAK POWER SENSORS
Frequency Ranges
- High Speed: (High Speed detectors can be used down to 500 MHz)
16936, 16937: 750 MHz to 18.5 GHz
17266: 750 MHz to 26.5 GHz
17071: 750 MHz to 40 GHz
- Low Speed:
16934, 16935: 30 MHz to 18.5 GHz
17267: 30 MHz to 26.5 GHz
Risetime
- High Speed: < 15 ns, typically 10 ns
- Low Speed: < 750 ns, typically 500 ns
Power Range
- Measurement: -20 to +20 dBm (Pulse), -40 to +20 dBm (CW)
- Absolute Maximum: (Damage Limit) +23 dBm (200 mW)
Connectors
- 16936, 16934: Type N
- 16937, 16935: Type APC-7
- 17266, 17071, 17267: Type K (SMA compatible)
|