 |
|
CATV Signal Analysis Meter
- Selectivity: sufficient to distinguish between two FM signals of equal amplitude
400 kHz apart
- IF bandwidth: 280 kHz at 3 dB point; 600 kHz at 40 dB point
- Video Output: 1 V output for full-scale meter reading
- AC Power Requirements (Charging Only): 110 VAC ± 10%
- Internal Battery: 12 V nominal; rechargeable; battery life typically 4 hours
continuous operation
- Dimensions: 7" H x 11" W x 10" D
- Weight: 11 lbs
Measurement Ranges
- Frequency: 4 to 600 MHz
- Amplitude: -40 to +60 dBmV
- HUM Modulation: 0.5 to 5%
- Voltage: 5 to 100 VAC/VDC
Spectrum Analyzer
- Frequency Range: Same as frequency measurement range
- Amplitude Range: -40 to +60 dBmV ( ≥ 40 dB displayed)
- Rate: 2 to 40 Hz continuously variable plus manual
- Dispersion: 0.15 to 600 MHz continuously variable
- Horizontal Output: approximately 0 to 9 V
- Vertical Output: approximately 0 to 2 V
|
