| Power Meter |
| Absolute Measurement Accuracy |
Within ±0.5 dB, when using the 75 Ohms power head over the range 10 MHz - 300 MHz or the 50 Ohms power head over the range 100 MHz - 11.7 GHz, including the effects of ancillary equipment |
| Accuracy of Power Meter Alone |
Within ±0.2 dB |
| RF band (5052)with low pass filter |
500 MHz - 700 MHz |
| 700 MHz - 1000 MHz |
| 2.11 GHz - 2 .18 GHz |
| 3.65 GHz - 4 .25 GHz |
| 5 .8 GHz - 6 .5 GHz |
| 10.6 GHz - 11 .7 GHz |
| IF band (75 Ohms) with low pass filter |
70 MHz and 74.1 MHz |
| Range |
+10 to -30dBm without external pads or amplifiers |
| Resolution |
0.010 |
| Digital Voltmeter |
| Ranges |
±0.1 to ±100 VDC |
| ±100 to ±999 VDC |
| Accuracy: |
±0.3V on 100V range and ±3V on 999V range |
| Spectrum Analyzer |
| General Requirement |
Provides a visual indication of the spectra of the total IF bands of fo ±32 MHz with a dynamic range of over 70 dB |
| Scan Width Selection IF Bands (fo =70 MHz &74 .1 MI-17. fo is centered on display) |
±1 MHz |
| ±5 MHz |
| ±15 MHz |
| ±32 MHz |
| Dynamic Range |
70 dB (±1 MHz) |
| 60 dB (all other scan widths) |
| 10 dB sensitivity/cm of deflection |
| RF Sweep Generator |
| CW Mode |
2 GHz band: |
2.11 GHz to 2.18 GHz (option 003) |
| 4 GHz band: |
3.65 GHz to 4.25 GHz |
| 6 GHz band: |
5.8 GHz to 6.5 GHz |
| 11 GHz band: |
10.6 GHz to 11.7 GHz (option 001) |
| Frequency Setting Accuracy |
Within ±1 x 10-5 |
| IF SWEEP GENERATOR |
| CW Mode |
70 MHz and 74.1 MHz |
| Frequency Setting Accuracy |
Within ±2 x 10-5 |
| FREQUENCY COUNTER |
| Frequency Range |
14 MHz to 300 MHz directly and without prescaling |
| Input Network |
At least 1 Mohms shunted by less than 20 pF (14 MHz to 135 MHz) and 50 Ohms (14 MHz to 300 MHz) switchable |
| Input Level |
15 mV to SVrms without need for level adjustment |
| Accuracy |
±1 count ±Time Base oscillator stability |
