 |
|
Anritsu MS2026A Vector Network Analyzer
The Anritsu MS 2026A Vectro Network Analyzer is the most ultra-portable VNAs on the market. It is designed to make accurate vector corrected 1-Port and 1-path 2-Port magnitude and phase measurements from 2 MHz to 6 GHz (MS2026A). The VNA Master's light weight(6.4lbs) and three hour battery life time provide you with the flexibility needed to make VNA measurements anywhere.
PERFORMANCE SPECIFICATIONS
Frequency
- Frequency Range: 2 to 6000 MHz
- Frequency Accuracy: 25 ppm
- Frequency Resolution: 10 kHz
- Data Points: Low, Medium, High (137/275/551)
- Interference Immunity:
- On-Channel: +17 dBm
- On-Frequency: +10 dBm (RF Out), +30 dBc RF In
- 1-Port Power: High: 0 dBm (typical)
- 2-Port Power: High: 0 dBm (typical) Low: –35 dBm (typical)
- Corrected Directivity: 42 dB (2 MHz to 6 GHz)
- 1-Port Accuracy: = <0.8 + |20 log(1 ±10-EΔ/20)| dB, typical EΔ = Directivity – Measured Return Loss
- System Dynamic Range:
- 80 dB, 2 MHz to 3 GHz
- 70 dB, >3 GHz to 5.5 GHz
- 65 dB, >5.5 GHz to 6 GHz
Return Loss
Range: 0 to 60 dB
Resolution: 0.01 dB
VSWR Range: 1 to 65
Resolution: 0.01
Cable Loss Range: 0 to 30 dB
Resolution: 0.01 dB
1-Port Phase Range: –180° to +180°
Resolution: 0.01°
Smith Chart Resolution: 0.01
2-Port Gain
Range: –120 to 100 dB
Resolution: 0.01 dB
2-Port Phase
Range: –180° to +180°
Resolution: 0.01°
Distance-to-Fault (DTF)
- Fault Resolution (meters): (1.5 x 108 x vp)/ΔF vp is the propagation constant and ΔF is F2-F1 in Hz
- Horizontal Range (meters): 0 to (data points-1) x Fault Resolution to a maximum of 1500m (4921 ft) where datapoints = 137/275/551
- Vertical Range (Return Loss): 0 to 60 dB
- Vertical Range (VSWR): 1 to 65
RF Power Monitor (Option 5): Display Range: –80 to +80 dBm (10 pW to 100 kW)
Detector Range: –40 to +20 dBm (100 nW to 100 mW)
Offset Range: 0 to +60 dB
Resolution: 0.1 dB or 0.1 W
Accuracy: ±1 dB maximum for >–40 dBm using 560-7N50B
Bias T (Option 10): Voltage/Current: +12 V, 250 or 500 mA steady state
+15 V, 250 or 500 mA steady state
+18 V, 350 mA steady state
+21 V, 300 mA steady state
+24 V, 250 mA steady state
GPS Receiver (Option 31) GPS Location Indicator
Latitude, Longitude, Altitude and UTC on Display
GENERAL SPECIFICATIONS
- Languages Built-in English, Spanish, Italian, French, German, Japanese, Korean, and Chinese. Can also customize two additional languages using Master Software Tools.
- Memory
Internal memory provides for the storage and recall of more than 1000 traces and setups. The contents of the internal memory can be copied to and from a removable Compact Flash Card.
- Markers 6 markers (Delta marker, peak search, valley search) and Marker Table.
- Traces View Trace, Memory, Trace-Memory, Trace + Memory, Trace and Memory
- Limit Lines Upper and Lower Limit. Each upper and lower limit can consist of
between one and forty segments.
|
