 |
|
RF Millivoltmeter
Features
- Measurement of transistor parameters.
- SWR and return loss measurements with directional couplers, reflection coefficient bridges, and slotted lines.
- Gain and loss measurements of wide-band amplifiers.
- Adjustment of tuned circuits in narrow-band amplifiers.
- Adjustment, performance measurements, and parameter evaluation of RF filters.
- Measurement of SWR, return loss, and attenuation of RF attenuators.
- Measurement of output levels of signal generators, adjustment of baluns, harmonic distortion measurements of RF signals, and adjustment of RF circuits for minimum voltage (null) or maximum voltage (peak).
Specifications
| Voltage Range |
200 mV to 3 V in 8 ranges (300 V to 700 MHz with Divider). Indications down to 50 mV. |
| Voltage Display |
1.000, 3.000, 10.00, 30.00, 100.0, 300.0, 1000, and 3000 mV fs |
| dB Range |
80 dB in 8 ranges, 0.01 dB resolution |
| Frequency Range |
10 kHz to 1.2 GHZ with 952001 probe; 100 kHz to 2.5 GHz with 952009 Sensor ( See Accessories). |
| Waveform Response |
RMS to 30 mV |
| Impedance |
50 ohms |
Please contact your sales rep for your accessories:
Measurement Range |
Required Accessories |
10 kHz to 1.2 GHz |
Model 952002 50-ohm BNC Adapter for
shielded connection to 50-ohm line; Model 952006 for 75-ohm line (to
500 MHz). Model 952003 50-ohm Tee Adapter for connection into 50-ohm
line; Model 952007 for 75-ohm line (to 1.0 GHz). |
Above 1.2 GHz |
Model 952009 50-ohm terminated sensor
(100 kHz-2.5 GHz). |
Input levels to 300 volts, or RMS
response to 3 V |
Model 952005 100:1 Voltage Divider
(50 kHz to 700 MHz); use with Model 952001 RF Probe only. |
|
