Advanced Test Equipment Rentals - Home Rentals - Sales - Service
Advanced Test Equipment Rentals
Toll Free: 1-800-404-ATEC (2832)
Follow ATEC on LinkedInFollow ATEC on YouTubeFollow ATEC on TwitterFollow ATEC on Facebook
Home > Equipment > Amplifiers > Microwave Amplifiers
Home > Manufacturers > Varian / CPI

Varian / CPI VZS/C-6963J2 Broadbond CW TWT Lab Amplifier

Varian / CPI VZS/C-6963J2 Compact Medium Power Amplifier

  • Compact
    Five rack units tall (8.75 in, 222 mm)
  • Versatile
    Ultra-wideband, automatic fault recycle, user-friendly microprocessor-controlled logic with integrated
    • computer interface, digital metering, electronic variable attenuation, soft-fail when subjected to extreme
    load SWR conditions, quiet operation for laboratory environment. An integral solid state pre-amplifier
    and IEEE interface are included as standard features.
  • Global Applications
    230 VAC operation. Meets International Safety Standard EN61010 and Electromagnetic Compatibility
    89/336/EEC.

Varian / CPI VZS/C-6963J2 Specifications:

Electrical
Frequency 2.0 to 8.0 GHz
Output Power (min.)
TWT 250 W
Flange 225 W
High Power Option
TWT 320 W
Flange 224 W from 2.0 to 2.5 GHz
290 W from 2.5 to 7.5 GHz
275 W from 7.5 to 8.0 GHz
Bandwidth 6.0 GHz
Gain 54 dB min. at rated power output
56 dB typ. at small signal
RF Level Adjust 0 to 20 dB continuous
Gain Stability ±0.25 dB/24 hr max.
(at constant drive and temp.)
Gain Variation 12.0 dB pk-pk max. over the
6.0 GHz bandwidth, typ.
Input VSWR 2.5:1 typ.
1.7:1 max. (with optional input isolator)
Output VSWR 2.5:1 typ.
Load VSWR 1.5:1 max. for full spec compliance;
2.0:1 max. continuous operation;
any value without damage
Residual AM -50 dBc below 10 kHz;
-20 [1.3 + log F (kHz)] dBc,
10 kHz to 500 kHz;
-85 dBc above 500 kHz
Phase Noise Meets IESS-308/309 with 3 dB margin
Noise and Spurious -50 dBc typ. excluding harmonics
Harmonic Content -3 dBc typical at lower band edge
Primary Power 220-240 VAC ±10%, single phase,
47-63 Hz
Power Consumption 2.6 kVA typ.
3.0 kVA max.
Inrush Current 200% max.
Environmental
Ambient Temperature -10° to +40°C operating
Relative Humidity 95% non-condensing
Altitude Up to 10,000 ft (3000 m) with standard adiabatic derating of 2°/1000 ft.
Shock and Vibration Designed to meet conditions normally encountered in the laboratory
Acoustic Noise 65 dBA @ 3 ft. from amplifier
Mechanical
Cooling (TWT) Forced air with integral blower. Rear air intake and exhaust.
RF Input Connection Type N female
RF Output Connection Type N female
RF Output Monitor Type-N female, -50 dB nominal
Dimensions (W x H x D) 19 x 8.75 x 26 in.
(483 x 222 x 661 mm)
Weight 110 lbs (50 kg)
Safety EN61010
Please contact us for more information on the CPI VZS/C-6963J2 Compact Medium Power Amplifier
Similar Test Equipment

Rent Amplifer Research

IFI SMCC250
250 Watts, 200 MHz - 1 GHz

Lease IFI T4026-500A High Power Traveling Wave Tube Amplifier
IFI T42-200
200 Watt TWT Amplifier

Rent, Buy or Lease the MCL MT4100 500 Watt TWT Amplifier
MCL MT4100
2.5 - 7.5 GHz, 500 Watt
TWT Amplifier

Rent Amplifier Research 50W1000A - Ultra-Broadband RF Power Amplifier
Amplifier Research 50W1000A
Ultra-Broadband RF Amplifier

Rent IFI T188-300 High Power Traveling Wave Tube Amplifier
IFI T188-300
TWT Amplifier
Forms Terms & Conditions Privacy Notice Home Page Terms of Use
Copyright © 1996-2010  |  Advanced Test Equipment Rentals  |  All Rights Reserved