 |
|
Dillon Dynamometer AP Crane Scales
Features
- Available in low, intermediate and high range models - Thirteen capacities from 500 to 50,000 pounds. Nine capacities from 200 to 20,000 kg
- Anti-parallax dial and pointer - Easy to read even at an angle
- Tare capability - Tare loads up to 20% of capacity can be zeroed out by means of zero control
- Dust protection - Pinion gear, sector gear and shafts are mounted in precision aircraft bearings, permanently sealed against dust and dirt. Oiling is never required
- Tough construction - Mechanism case is a heavy aluminum alloy casting, tough enough to resist even heavy blows
- Ingenious design - Utilizes a specially designed alloy steel beam that translates force to pounds. Full scale reading results from beam deflection of only 0.026".Applied loads are indicated instantly
- Reduced wear - Pinion and sector gears are cut from stainless steel and hardened aluminum. Use of these dissimilar materials greatly reduces friction and wear
- Protective finish - Scale cases are coated with a baked-on powder paint process making them resistant to chips, scratches, rust and corrosion
- Maximum indicator - Remains in position to indicate peak load point after load is removed from scale
Specifications
| Accuracy |
To ±0.5% of full scale |
| Tare adjustment |
Up to 20% of full scale range |
| Ultimate safety factor |
5:1 (* 4:1 for 20,000 lb, 50,000 lb, 10000 kg and 20000 kg) |
| Dial diameter |
10" |
| Scale length: (from inside of eye to inside of hook) |
Low Range: |
25 1/2" |
| Intermediate Range: |
29 3/4" |
| High Range: |
37 1/2" |
|
