 |
|
Isotron Conditioner
and Power SupplyModel 104 Amplifier
- Input type: Single-ended with one side connected to the circuit
common and case
- Maximum Input: 30,000 pC peak without overload charge
- Overload Recovery: Negligible for 50 msec
square pulse whose amplitude does not exceed
- Input Resistance: 10 M ohms minimum
- Input Capacitance: 30,000 pF maximum
- Max Output Voltage: 10 V peak
- Max Output Current: 3 mA
- Output Offset Voltage: 15 mV max
- Output Protection: Short circuit to ground
- Output Range:
| Sens.Multiplier |
mV/g |
mV/g |
| X1 |
1.00 - 10.99 |
1, 2, 5, 10, 20, 50,100 |
| X10 |
10.0 - 109.9 |
10, 20, 50, 100, 200, 500, 1000 |
| X100 |
100 - 1099 |
100, 200, 500, 1 k, 2k, 5k, 10k |
- Gain Accuracy: ±2.0% at 1 kHz
- Unit Gain: 0.1 to 100
- Frequency Response: Flat gain within bandwidth
- Upper cutoff: 20 kHz
- Lower cutoff: 1.0 Hz maximum
Model 109 Power Supply
- Standard Voltage: 105 to 132 VAC
- Frequency: 47 to 63 Hz
- Power Consumption: 25 Watts
- Standard Fuse: 1/2 ampere
- Output Voltage: +24, +15, -15 VDC at 400 mA each
- Line Regulation: ±0.2% for 10% line change
- Load Regulation: ±0.3% for 50% load change
- Output Ripple: 6 mV peak-to-peak
- Protection: Short circuit and overload
|
