 |
|
Dual
Input Oscilloscope
Isolated Inputs A and B
(Vertical)
- Bandwidth, DC Coupled: 200 MHz (-3 dB)
- Lower Frequency Limit, AC Coupled:
- with 10:1
probe......<2 Hz (-3 dB)
- direct (1:1)
..... <5 Hz (-3 dB)
- Rise Time: 1.7
ns
- Analog Bandwidth Limiters .....
20 MHz and 10 kHz
- Input
Coupling.AC, DC
- Polarity
..... Normal, Inverted
- Sensitivity Ranges C versions:
- with 10:1 probe.....
20 mV to 1000 V/div
- direct (1:1)
. 2 mV to 100 V/div
- Sensitivity Ranges B versions:
- with 10:1 probe.....
50 mV to 1000 V/div
- direct (1:1)
. 5 mV to 100 V/div
- Trace Positioning
Range... 4 divisions
- Input Impedance on BNC:
- DC Coupled..... 1 MW(±1
%)//15 pF (±2
pF)
- Max. Input Voltage
- with 10:1 probe 600 V CAT III;
1000 V CAT II
- direct (1:1)
. 300 V CAT III
- Vertical Accuracy
(1.5 % + 0.04 range/div)
- 2 mV/div: ... (2.5 % + 0.08 range/div)
- Digitizer Resolution: 8 bits,
separate digitizer for each input
Horizontal
- Maximum Time Base Speed: 5 ns/div
- Minimum Time Base Speed (Scope
Record): 2 min/div
- Real Time Sampling Rate (for both
inputs simultaneously)
- 5 ns to 2 s /div
..... up to 2.5 GS/s
- 5 s to 120 s/div
...... 20 MS/s
- Record Length
- Scope Record Mode: >27000
points on each input
- Scope Normal Mode: 1200 points on
each input
- Scope Glitch Capture Mode
...... 300 min/max pairs on each input
- Glitch Detection: 5 s to 120 s/div
- Waveform Display.. A, B,
A+B, A-B, A*B, A vs B Normal, Average (2,4,8,64 x), Persistence
- Time Base Accuracy
±(100 ppm + 0.04 div)
Trigger and Delay
- Trigger Modes: Automatic, Edge,
External, Video, Pulse Width
- Trigger
Delay..... up to +1200 divisions
- Pre Trigger View
one full screen length
- Max. Delay
... 12 seconds
Automatic Connect-and-View
Trigger
- Source...
A, B, EXT
- Slope..Positive,
Negative
Edge Trigger
- Screen Update: Free Run, On Trigger,
Single Shot
- Source
A, B, EXT
- Slope
. Positive, Negative
- Trigger Level Control Range
.... 4 divisions
- Trigger Sensitivity A and B:
- DC to 5 MHz at >5 mV/div
.... 0.5 divisions
- DC to 5 MHz at 2 mV/div and 5
mV/div ... 1 division
- 200 MHz (FLUKE 199B)
1 division
- 250 MHz (FLUKE 199B)
...... 2 division
Isolated External Trigger
- Bandwidth: 10 kHz
- Modes: Automatic, Edge
- Trigger Levels (DC to 10 kHz): 120 mV,
1.2 V
Video Trigger
- Standards ... PAL, PAL+,
NTSC, SECAM
- Modes.... Lines, Line Select,
Field 1 or Field 2
- Source
......A
- Polarity
... Positive, Negative
- Sensitivity
...... 0.7 division sync level
|
Pulse Width Trigger
- Screen
Update On Trigger, Single Shot
- Trigger
Conditions.....<T, >T, =T (±10 %), .T(±10
%)
- Source....
A
- Polarity
.Positive or negative pulse
- Pulse Time Adjustment Range ..
0.01 div. to 655 div.
- with a minimum of 300 ns
(<T, >T) or 500 ns (=T, .T),
- a maximum of 10 s,
- and a resolution of 0.01 div. with
a minimum of 50 ns
Continuous Auto Set
- Modes:
- Normal
15 Hz to max. bandwidth
- Low
Frequency.. 1 Hz to max. bandwidth
- Minimum Amplitude A and B
- DC to 1
MHz...... 10 mV
- 1 MHz to max.
bandwidth 20 mV
Automatic Capturing Scope
Screens
- Capacity
100 dual input scope Screens
Automatic Scope Measurements
General
- Inputs
....
A and B
- DC Common Mode Rejection (CMRR)....
>100 dB
- AC Common Mode Rejection at 50, 60, or
400 Hz >60 dB
DC Voltage (VDC)
- Maximum Voltage
- with 10:1
probe... 1000 V
- direct (1:1)
.... 300
V
- Maximum Resolution
- with 10:1
probe...... 1 mV
- direct (1:1)
.. 100
µV
- Full Scale Reading
...... 1100 counts
- Accuracy at 5 s to 5 s/div
..... (1.5 % +5 counts)
- 2 mV/div..... (1.5 % + 10 counts)
- Normal Mode AC Rejection at 50 or 60
Hz ..... >60 dB
AC Voltage (VAC)
- Maximum Voltage
- with 10:1
probe.1000 V
- direct (1:1)
..300 V
- Maximum Resolution
- with 10:1
probe....1 mV
- direct (1:1)
100 µV
- Full Scale
Reading... 1100 counts
- Accuracy DC
coupled: DC to 60 Hz: (1.5 % +10
counts)
- AC coupled, low frequencies:
- 50 Hz direct (1:1)
..(2.1 % + 10 counts)
- 60 Hz direct (1:1)
..(1.9 % + 10 counts)
- AC or DC coupled, high frequencies:
- 60 Hz to 20
kHz....(2.5 % + 15 counts)
- 20 kHz to 1 MHz
......(5 % + 20 counts)
- 1 MHz to 25
MHz...(10 % + 20 counts)
- Normal Mode DC
Rejection>50 dB
AC+DC Voltage (True RMS)
- Maximum Voltage:
- with 10:1 probe
... 1000 V
- direct (1:1)
...... 300 V
- Maximum Resolution
- with 10:1 probe
...... 1 mV
- direct (1:1)
.... 100 µV
- Full Scale Reading
... 1100 counts
- Accuracy:
- DC to 60 Hz
.... (1.5 % + 10 counts)
- 60 Hz to 20 kHz
...... (2.5 % + 15 counts)
- 20 kHz to 1 MHz
(5 % + 20 counts)
- 1 MHz to 25 MHz
..... (10 % + 20 counts)
|
