Fluke DSP-FTA-440S Fiber Adapters

To Increase the power of your Fluke DSP-4000 Series Digital CableAnalyzer you can use the Fiber Test Adapter Series from Fluke Networks.

With these, you can properly test all types of fiber: singlemode, multimode, and Gigabit Ethernet multimode. The small, compact adapters add automated dual-fiber, dual-wavelength test and certification capability to the DSP-4000 Series CableAnalyzer and will quick transform it into a full-featured optical fiber tester.

General Specifications
Temperature range Operating	0 °C to +40 °C; Storage: -10 °C to +60 °C
Warm-up time	5 minutes
Humidity range Operating	0 % to 75 % RH, non-condensing
Storage	0 % to 95 % RH, non-condensing
Optical Transmitter
Connector	SC FTA440S 50.0µm multimode
Emitter type	FTA440 850 nm Vertical Cavity Surface Emitting Laser (VCSEL); 310 nm FP laser
Wavelengths	FTA440 850nm and 1310 nm
Power output	FTA440 -10 dBm
Power output stability (8 hours)	±0.25 dB at 23 °C
Optical Receiver
Power measurement accuracy	±0.25 dB at 23 °C, 45% RH to 75% RH, -20 dBm for 850 nm and 1300 nm, -10 dBm for 1550 nm
Connector	SC FTA440S 50.0µm multimode
Detector type	InGaAs
Calibrated wavelengths	850 nm, 1300 nm, 1310 nm, 1550 nm and 1625 nm
Power Measurement range	0 dBm to -50 dBm
Power measurement linearity	±0.25 dB at 23 °C
Length Measurement Measured in Loopback Mode with included SC/ST patch cables and one pair of ST/ST adapters.	FTA440 5000 meters of 50.0µm multimode cable