| HP 3586C Selective Level Meter
The HP 3586C selective level meter finds applications in
general- purpose wave analysis for the design, manufacture, and
maintenance of electronic systems. The HP 3586C is fully HP-IB
programmable and covers the frequency range of 50 Hz to 32.5 MHz. This
allows you to measure audio, sonar, and other
low-frequency systems, as well as high-frequency communications
subsystems. The HP 3586C provides input impedances of 50,75,and 600 fa
with 10 kfl bridging for maximum measurement flexibility in a wide variety
of applications. Measure signal levels with up to ±
0.2 dB accuracy down to --80 dB, with 0.01 dB resolution and bandwidth
choices of 20,400,or 3100 Hz. The built-in counter
and narrow-resolution bandwidths allow harmonic and intermodulation
measurements to be made with ease. Frequency can be set or measured with
0.1 Hz resolution and 10 ppm stability (± 0.2 ppm
optional)).
For frequency response measurement of high-Q filters and
other selective networks, the companion HP
3336C synthesizer/level generator functions as a full-featured, HP-IB
programmable tracking generator. Frequency range for the HP
3336C is 10 Hz to 21 MHz, with precise output levels from -70 to +8
dBm.
HP 3586C Specifications (abbreviated)
Frequency
Range:50/75 f2 unbalanced input,50 Hz to 32.5 MHz;600
0 balanced input,100 Hz to 108 kHz
Resolution:0.1 Hz
Center frequency accuracy:±1
x 10 - 5/year (± 2 x 10 - /year with Option 004)
Selectivity
3dB bandwidth:± 10%%:20 Hz,400 Hz,3100 Hz
Pass band flatness:±0.3 dB
Level Accuracy (+20 to -80 dB):
0.20 dBm, 20 kHz to 18 MHz (± 2 x 10 /year with
Option 004)
± 0.25 dBm,,18 MHz to 32.5 MHz |
