Quadtech Sentry 50 Plus Ground Bond Tester
The Quadtech Sentry 50 Plus Ground Bond Tester provides up to 30A for high current testing to even the most stringent standards. The front panel of the Quadtech Sentry 50+ instrument includes a digital display and user friendly control allowing test parameters and limits to be set easily without the high current activated.
Wide Test Current Range: User programmable output current, 3A to 30A AC in 0.01A steps, provides extensive coverage for testing to UL, CSA, VDE, IEC and other agency safety requirements.
Programmable Source Voltage: Limit the voltage to the DUT using the programmable source voltage from 1.0V to 8.0V rms and meet the low voltage requirement of CSA 22.2 No. 0.4 Bonding and Grounding of Electrical Equipment (4V, 30A, 100mW limit, 2-minute test) plus many others.
Programmable High and Low Resistance Limits: A resistance measurement range from 0.1mWto 510mW, plus user programmable high and low resistance limits with Pass/Fail indication, make this tester ideal for production Go/NoGo testing.
Remote Control: Incorporate the Sentry 50 Plus Ground Bond Tester unit into an automated manufacturing environment with remote start and Go/NoGo results output through the rear panel PLC interface.
Hipot Compatibility: The Sentry 50 Plus can be used alone or connected to the Sentry Plus 10, 20 or 30 Hipot Testers for complete product electrical safety testing with the push of one button. When the Sentry 50 Plus has completed a continuity test, with pass indication, it can remotely start the Sentry Plus Series instrument for a hipot test in sequence.
Built-in Calibration via Software: Front panel display of an operator prompted calibration routine makes for no internal adjustments.
Applications
- Production Testing of Instruments and Appliances
- Testing of Information Technology Equipment, Medical Instrumentation, and other Electrical Products with 3-prong Power Cords
- Electrical Safety Testing of Motors, Generators, and Transformers
- Low Resistance Testing of Electrical Connections
Features
- Programmable Output Current from 3A to 30A AC
- Programmable Source Voltage from 1.0 to 8.0V rms
- Resistance Measurements from 0.1mW to 510mW
- Programmable High and Low Limits
- Programmable Test Time
- Storage of 99 Tests Setups with Multiple Steps per Measurement
- Remote I/O Interface
- Graphic LCD
- Front Panel Lockout
- 4-Terminal Kelvin Connection
- Built-in Calibration Software
- Compatible with Sentry & Guardian Series Hipot Testers
|
