600 Volt DC Power Supply
Sorensen DCR600-3B Series high power programmable DC power supplies
have input SCR pre-regulator topology plus regulation and transient
response performance suitable for all test and measurement applications.
Twenty-nine models in eight voltage ranges offer from 0-10 to 0-600 Vdc
with power levels from 400 to 2800 watts.
Sorensen DCR600-3B Features:
- OVP "crowbar" standard on all DCR-B2
models.
- Rack mountable
- Series and Parallel Operation
- Remote voltage or resistance programming in voltage
or current modes
- 50 or 60 Hz operation, without de-rating
- 0.03% line and load regulation (typical)
- 120 volt single phase input standard on models up to
1800 watt (208/220/230VAC optional)
Sorensen DCR600-3B Specificationss:
INPUT
Voltage: 120 volt, single phase standard on all models up to 1800 watts.
208 volt single phase standard on all others. See below for other options.
Frequency: 47-63Hz
Isolation Voltage: 1000 volt DC input to output
OUTPUT
Regulation: 0.03% in voltage mode for a 100% load change and full line
voltage change combined
Noise Ripple: 65 mV to 1200 mV , depending on model
Transient Response: 50mS typical for a 50% load change
GENERAL
Operating Temperature Range: 0 - 70° C, (derate power 1.67%/° C above 40°
C)
Remote Programming: Resistance and voltage programming via rear terminal
strip.
V/I Crossover: Automatic between voltage and current
Ambient Cooling: Convection cooled on 500 watt and 1800 watt, fan cooled
on 1000 watt and 2800 watt models. |
